Question about 1991 Chevrolet Camaro

1 Answer

No brake lights on my 1991 chevy camaro

All the other lights work. just when i press the brake, no brake lights, at night they dont get brighter when lights are on.

Posted by on

  • special1980 May 11, 2010

    do they work at all at night?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 135 Answers

1. check brake light fuse 2.check brake light bulb 3. check to see if brake light switch is getting power

Posted on May 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 camaro tail light issue


Sounds like you need to check the ground for the taillights.

May 25, 2012 | Chevrolet Camaro Cars & Trucks

1 Answer

The back passenger blinker wont work and the bulbs


Different filament.
You have two filaments in those bulbs. A dim one for lights, and a second one that's brighter for directional and brake. You need to see if you have a good ground and both positive's at the socket.( with the parking and directional on)

Feb 23, 2010 | 1991 Chevrolet K1500

1 Answer

Rotors on 1991 chevy camaro. are there bearings that need to be pressed into the rotors


there are bearings but they do not have to be pressed in you can use a rubber mallot and tap them into place only the inner bearing needs to be tapped in

Dec 13, 2009 | 1991 Chevrolet Camaro

1 Answer

How do I replace Brake light switch?


Make sure the switch is the culprit. Do the other taillights work when braking? if so, look for a problem elsewhere, such as wiring to the 3rd light. Give special attention where the cable is routed through the trunk lid.

Dec 06, 2009 | 1995 Chevrolet Camaro

2 Answers

My 2005 Chevy Avalanche has no brake lights


See if the turn signals work,and the flashers,the problem,is most likely in one of the flashers,they are stuck,the flasher.

Nov 11, 2009 | 2007 Chevrolet Silverado 1500 2WD

1 Answer

Stereo wiring diagram for 1991 chevy camaro


1991-92 Chevrolet Camaro Stereo Wiring Constant 12V+ Orange Switched 12V+ Yellow Ground Black Illumination Gray Dimmer Brown Antenna Trigger Pink Antenna Right Front Front Speakers 4" x 6" Dash Left Front (+) Tan Left Front (-) Gray Right Front (+) Light Green Right Front (-) Dark Green Rear Speakers 6" x 9" Side Panels Left Rear (+) Brown Left Rear (-) Yellow Right Rear (+) Dark Blue Right Rear (-) Light Blue
hope this helps

Jul 04, 2009 | 1991 Chevrolet Camaro

1 Answer

1991 toyota mr2 back lights will not turn off fuses? brake switch, what do you think?


if u push on the brakes and the lites dont get any brighter the its the brake lite switch

Jun 23, 2009 | Infiniti Q45 Cars & Trucks

1 Answer

1987 Toyota Camry, brake lights...


Your brakes electric circuit is feeding power to a number of other circuits.There is a short circuit that needs to be fixed as soon as possible.It is a visual only repair as it could be crossed anywhere and you would really need to see what has been done to the original wiring.Should not take a sparky more than 1 hour to diagnose and probably fix.

Oct 17, 2008 | 1991 Volvo 240

1 Answer

Motor turns over good but wont start


please.. 1991 chevy lumina..mech has car for 4 days..
repl ICM.ECM..checked ..all fuses.cranks..no run..smell fuel.
says spark good.Fuel press @ 42. put light on fuel injec sensor
..tells me weak signal( light shud be brighter) .Says it ran once
in 4 days for 2 min & died..." tells me injectors not accepting fuel

Jul 28, 2008 | 1991 Chevrolet Lumina Apv

Not finding what you are looking for?
1991 Chevrolet Camaro Logo

348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...