Question about 2004 Nissan Quest

1 Answer

Need to remove tail light lens

How do I remove the tail light lens on a 2004 quest

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 351 Answers

It should tell you how to do it in the cars handbook if you have one with the car.
A lot of the cars have the retaining screws in the boot opening when it is in the raised position.
others have the retaining screws in the back left and right corners behind the lights, you have to remove the trim that covers the back of the lights to gain access,
Hope this helps

Posted on May 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How to Remove Tail Lights on a Chevrolet blazer Car?


The tail light consists of the brake lights, reverse lights, parking lights and turn indicator lights. 1)Tail lights at the back of your car. 2)Tail lights are on each back corner of the car. 3)There is plastic lens on above the tail lights in car. 4) Remove the screws on lens cover. 5) Remove the bulb after lens is removed. 6)The access panel will be on the inside of the trunk in the same position as the tail lights. 7)Open the trunk to access panel for the tail lights. 8) The bulb is screwed. 9) turn it counter clockwise to loosen and remove the bulb. 10) Reinsert the new bulb in the same procedure of how to removed. This will help.thanks.

on Mar 18, 2010 | Chevrolet Blazer Cars & Trucks

Tip

How to Remove Tail Lights on a Car?


The tail light consists of the brake lights, reverse lights, parking lights and turn indicator lights. 1)Tail lights at the back of your car. 2)Tail lights are on each back corner of the car. 3)There is plastic lens on above the tail lights in car. 4) Remove the screws on lens cover. 5) Remove the bulb after lens is removed. 6)The access panel will be on the inside of the trunk in the same position as the tail lights. 7)Open the trunk to access panel for the tail lights. 8) The bulb is screwed. 9) turn it counter clockwise to loosen and remove the bulb. 10) Reinsert the new bulb in the same procedure of how to removed. This will help.thanks.

on Mar 18, 2010 | Eagle Vision Cars & Trucks

1 Answer

How do i change rear off side quarter glass


Access to the tail light lens should be through panels in the rear corners of the vehicle. Remove the panel and you can remove the tail light cluster and the fasteners that attach the lens to the body work. This is the position on most sedans, unless, like on pick-ups, the tail light lenses have screws which allow the lenses to be from the outside.

May 01, 2011 | 2004 Jaguar X-Type

1 Answer

I've removed the three hex nuts, trying to remove the tail light from my 2005 Kia Rio. I still can't get the housing unit removed in order to change a burned out bulb.


to remove the tail light asm from2003-2004 rio you will need to remove the three nuts inside and also pull carpet back to take a good look at the rear of the lamp, you will then need a plastic wedge to go behind the light and body on the outter edge this will release the pinch stud on the end of the lamp and out comes the lens asm, hope this helps, good day.

Mar 05, 2011 | 2005 Kia Rio

2 Answers

How do I replace a tail light lens on a 2004 dodge caravan


have to replace tail light asm, open hatch remove 2 clips or screws they might have either,and gentle pull out and remove connector.good luck.

Oct 10, 2009 | 2004 Dodge Caravan

1 Answer

Removing tail light


Drop the tailgate - there are two torx style bolts holding the lens assembly in place. Remove both, then with some gentle force, pull the lens assembly straight back(there are two self seating plastic bolts that hold the assembly into the truck frame, towards the cab).

Once undone, there is a strip of three bulbs on one wired base, and that base is screwed to the lens assembly (4 phillips screws). Unscrew those, and the lens assembly is free from the base. You can then remove the bulbs, insert new ones, and reverse the process. Good luck.

Nov 02, 2008 | 2004 Dodge Ram 1500

1 Answer

Nissan Quest 2004 Tail Lights


Robynumber1,

Thanks for the email back. The nissan quest tail lights werenot operating, but the break lights were working. This was ultimately caused by a blown fuse. The fuse was blown by loose trailer lighting wires dragging on the ground, thus shorting. Problem fixed.

Aug 17, 2008 | 2004 Nissan Quest

1 Answer

BROKE TAIL LIGHT LENS AND BULB


Tiffany, there should be an access panel to remove to replace the bulb in your tail light.

Jun 19, 2008 | 2001 Nissan Quest

Not finding what you are looking for?
2004 Nissan Quest Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...