Question about BMW X5 Series

2 Answers

Door locks wont work

When I press my lock/unlock button on my car it doesn't do anything. None of the doors will lock or unlock. I checked the fuse and it looks fine.

Posted by on

  • ruthomas May 18, 2009

    Romote unlock/lock doesn't work, inside unlock button on center console doesn't work,inside lights don't come on when door opened, trunk opens by remote on key

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 2003 Lincoln Cartier, My door locks, power seats, trunk lid dstopped working. I checked the 7.5 fuse and changed it (it was good) they still do not work. what about the main fuse under the hood or the relay under the dash.

Posted on Aug 12, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 12 Answers

Check if the batteries in key remote are good.
if good
nedd to reset your key by putting in the ignition just turn the dash lights on ...dont start the car and once the ignition lights shows on the dash board just press unlock and lock once ot twice until it locks and unlocks while u in the car. try that it had worked for me before should do for urs.

Posted on May 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why don't power locks work?


it maybe the BCM may have a problem or needs to be reset.

Sep 06, 2015 | 2010 Chevrolet Chevrolet Malibu LT

1 Answer

On my 2006 Chrysler 300/ the auto lock button on my key remote doesn't lock or unlock doors?


how do I reset one of two keys that the unlock,lock,trunck does't work but the key turns the engine over.

Oct 08, 2012 | 2006 Chrysler 300

1 Answer

How to fix 2007 scion tc lock/unlock on front door panel


fuse for door locks is under hood, number 6, not inside of car, look at lid of fuse box it will tell you where number 6 is

Jun 07, 2012 | 2007 Scion tC Coupe

1 Answer

97 jetta doors won't lock


I assume the doors can be manually locked. The problem is in the electrical circuit. That means anything from a faulty switch (the lock / Unlock button) to a loose connection. If both switches don't work then look for a blown fuse. If one switch works and the other doesn't than remove the switch and inspect its connection. If it's ok then check the switch. If both switch and connections are OK then you'll have to remove the door panel and access the lock mechanism.

Dec 11, 2011 | 1997 Volkswagen Jetta

1 Answer

Sorry my car was not listed so picked Altima 2003 Micra Intelligent key fob not working properly. Can drive the car but cannot open or lock the doors. Did get fob wet. Now dried out. Worked for first few...


You are going to need to check the power lock control moduel on the inside of the door panel. If the FOB appears to be working but the doors are not unlocking, you need to check this. I would also replace all fuses that control the locks. If both of these devices check out ok, you may need to replace your FOB. To check your power lock control moduel, manually lock and unlock your doors by pressing the lock button on the inside of the door. If it does not work, it is either the fuses or the power lock control moduel. If it works, your FOB has gone bad. Hope this helps! Please rate 4 thumbs up!

Apr 18, 2011 | Nissan Altima Cars & Trucks

1 Answer

Driver side door wont lock


I work at a car dealership and usually turns out to be the door lock actuator itself if everything is working as you say.

Aug 19, 2009 | 1999 Chevrolet Blazer

2 Answers

Power door lock doesnt work properly, it unlocks but wont lock


Hello, I had a similar problem. I checked the fuses dr unlck 10amp, dr lock 20amp, both fine. However, I finally had no choice and checked all other fuses and the 15 amp fuse labeled "CTSY" was bad! So, check that fuse. If a similar problem has happend to you, it could be all you need.
banghead.gif lol

Jun 03, 2009 | 1994 Pontiac Grand Am

1 Answer

Doors wont all lock at the same time on my '95 saab 9000cs. i have to manually lock them individually. My dashboard lights flicker, sometimes the lights will stay on and sometimes i have to tap the switch...


When you use your remote or insert your key in the Drivers Front door all the door locks should work at the same time by the door lock motors electrically. If you have to manually unlock the door because it will not lock or unlock by the lock motor, you need a door lock motor. The drivers and passengers front doors can unlocked with the key manually only. The rear doors you have to pull up the latch. 
If NONE of doors unlock electrically with the remote or drivers door lock, intermittently or all the time, you will need a Central Locking Electronic Control Module. Pressing the remote button you will hear the "beep", but no door locks will fire at all. 
If you have a few odd door locks not working intermittently or not at all, you will need a new door lock motor for each door lock that malfunctions. You can hear if the door locks are working electrically. Yes, they are common problem. 
If you can hear the door lock motor working but the door still doesn't unlock you need to take the door panel off and lubricate the door latch assembly and work the lock, loosening it up. This is common as well.
Sometimes a bad door lock motor can blow the central locking fuse. You will notice it because it will take a second or two longer to lock and unlock compared to the others. If the door lock motors seem fine, install a the next step up in amperage fuse. (From 15 AMP to a 20 AMP)

Apr 09, 2009 | 1997 Saab 9000

1 Answer

2000 Safari, power locks,Rear dutch door wont unlock,


can you use the key its self on the rear door. what i mean is not using the remote but actually using the key?

Dec 19, 2008 | 2000 GMC Safari

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,087 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...