Question about Suzuki X-90

1 Answer

Ignition Timing How do I set ignition timing on a Suzuki X90?

Posted by on

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 137 Answers

What year.?
http://www.kick-fix.com/

following link, see 16v timing.
same.

Posted on May 14, 2009

  • jerry Hodson May 14, 2009

    http://www.kick-fix.com/IGN_timing/16v-p...

    there, i clicked it for you.



  • jerry Hodson May 14, 2009

    on the 97 the specifications on the exact timing are.

    the timing spec, is on the white sticker , in the hood.
    look under hood, then up., see... required buy usa laws.

    then the freeze jumper in just behind the right head light.
    jumper pins 4 to 5 with paper clip.
    then set timing with an electronic strobe timing light.
    rotate distributor to do this, then tighten its clamp screw.

    idle must be 800 on hot engine.



×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mini Truck u14T with 549cc engine. How can I set timing?


    Engine timing ' Japanese Mini Truck Forum

    minitrucktalk.com > Forums > Japanese Mini Trucks > Suzuki Carry
    Feb 12, 2014 - Found some info with misspellings and possibly incomplete instructions. I replaced the head gasket. Now I need to do the timing so the engine ... Sambar - serious engine damage after oil leak repair and timing ...
    Jan 13, 2015
    The importance of replacing timing belt before it breaks ...
    Jan 6, 2013
    Timing Belt Change How To
    Oct 24, 2008
    Setting your ignition timing
    Sep 9, 2008
    More results from minitrucktalk.com images for Mitsubishi mini truck engine timing

Jan 08, 2016 | Mitsubishi Cars & Trucks

1 Answer

How to set ignition timing for toyota 3yeu


How to check and adjust ignition timing: toyota 3.0L - YouTube

? 1:58
https://www.youtube.com/watch?v=pOdFqKxPviA
Dec 3, 2014 - Uploaded by SCOTT BROWN
shown is a 1990 Toyota pick up. It should be generally the same procedure for most early 90's and late 80's ...

How To Check Ignition Timing 22re - YouTube

? 2:08
https://www.youtube.com/watch?v=g-79YITt0YM
Aug 14, 2012 - Uploaded by 612to303
How To Check Ignition Timing 22re ... How to Remove and Install a Toyota 20R 22R 22RE Distributor - Duration: 7:48. by ...22RE Toyota Pickup/4Runner Valve Adjustment - Duration: 26:31. by TheAlexManVideos 68,157 views ... How to Set Ignition Timing on a 1.3L Suzuki Samurai Engine - Duration: ...

Ignition timing adjustment - YotaTech Forums

www.yotatech.com/f2/ignition-timing-adjustment-9882/


Jan 04, 2016 | Toyota 4Runner Cars & Trucks

1 Answer

Ignition timing on a 1981 Suzuki GS1000L


with a 4 cylinder engine if you have no 1 piston timed correctly then all the rest will be timed automatically
there is no individual timing for each cylinder

Dec 25, 2015 | Cars & Trucks

1 Answer

What is the ignition timing for 2002 nissan hardbody 2000i 16v


Here are the 3 engines listed for this year. IGNITION TIMING

2002 Nissan/Datsun Truck Frontier Pickup 2WD 2.4L SFI 4cyl

The Ignition Timing

18-22 DegreesBefore top dead center - When throttle positionsensor disconnected and using suitably programmedscan tool.When adjusting idle speed, set parking brake & chock drive wheels, curb idle speed (750-850 RPM)transmission in neutral.

IGNITION TIMING

2002 Nissan/Datsun Truck Frontier Pickup 2WD 3.3L SFI 6cyl

The Ignition Timing

8-12 DegreesBefore top dead center - throttle position sensorharness disconnected.When adjusting idle speed, set parking brake & chock drive wheels, curb idle speed (700-800 RPM)transmission in neutral.

IGNITION TIMING

2002 Nissan/Datsun Truck Frontier Pickup 2WD 3.3L SFI SC 6cyl

The Ignition Timing

8-12 DegreesBefore top dead center - throttle position sensorharness disconnected.When adjusting idle speed, set parking brake & chockdrive wheels, curb idle speed (700-800 RPM)transmission in neutral.

Jun 05, 2015 | Nissan Hardbody Cars & Trucks

1 Answer

How to jumped timing


how to jumped timing.
is this :
1: why did my timing change (ignition or cam?)
2: wow to activate the timing freeze jumper for setting spark timing?
what?

Mar 02, 2013 | 1995 Suzuki Swift

1 Answer

1996 SUZUKI X90 WONT START AND THE SPARK IS LOW


can only be 3 things, bad motor, bad spark and bad fueling, in that order.
and 3 tools to check each, in that order.
ever do the 60k tuneup, (I have 4 of these cars restored and 3 sold)
http://www.fixkick.com/nostart.html

my guess is fuel pressure good means it passes the squirt test
right? this is no carb, EFI needs 30psi, and squirt tests tell you near nothing.
Ponder this. if the motor had 170psi compression
and the spark was good, (it will be tuned up)
and is timed, right. is it?
then it will run perfect on test fuel. does it.?
if yes , then you have fueling problem , once this is proven, we work fueling hard.

Feb 13, 2013 | 1996 Suzuki X-90

1 Answer

At what degree angle would I set my timing mark for Suzuki Vitara 16v engine


old post.
http://www.scantool.net/software/alldata-diy-1-month-subscription.html

the answer is this in USA, are you>?
open hood, look up ,behold the white sticker, and is there.
all suz. have a timing freeze jumper, starting in newer years its a factory only scan tool setting.
on yours, must 1.6L , the liters tell me what engine not valve count.
to set timing, you need a strobe light , got one?
1: hot motor.
2; idle rpm perfect. not too low, or high.
4: timing freeze, enabled.
5: set timing with strobe , using under hood sticker data.

Feb 11, 2013 | 2000 Suzuki Vitara

1 Answer

Ignition timing for suzuki vitara


A LOT depends on WHICH ENGINE your 1999 Suzuki Grand Vitara is equipped with.Ignition timing is not adjustable on any engine except the 2.5L V-6.
To adjust the ignition timing on the 2.5L V-6, a scan tool must be used to turn off the computer timing control to check and adjust base ignition timing. Base ignition timing specification is 4-6 degrees BTDC.

Jun 01, 2012 | 1999 Suzuki Grand Vitara

1 Answer

How to set timing on 2004 Suzuki XL7


If you are refering to ignition timing, the ignition timing is controlled by the Engine Control Module (ECM) and is not adjustable on your vehicle.

Jan 23, 2011 | 2007 Suzuki XL-7

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

649 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...