Question about 1998 Dodge Dakota

1 Answer

Cranks but wont start

2000 dodge dakota 2.5 ,cranks but will not start, have no spark, no fuel pressure, gauges do not wk, such as gas gauge,volt gauge etc. the check engine light does come on with the key, and ran a computer test, comes up no data,

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Check your ignition module. If that is not it, I recommend checking your ignition switch i.e. the thing you insert you key into when you start. There is a possibility that your ignition switch is bad.

Posted on May 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How to check the fuel injuctors, on 2000 dodge durango, p0ssible no gas toplugs the reason it wont start


Check fuel line for pressure - there should be something like a bike tire valve on fuel line - press the inner part of it and see if gas spurts out hard. If so you have pressure , a working fuel pump, and gas is reaching the injectors.

Check out the igniter?

Oct 22, 2016 | 2000 Dodge Durango

1 Answer

2007 Dakota wont start; fuel gauge reads empty, but I put 5 gallons in it to make sure it wasnt empty. Any ideas?


Does the engine spin (crank ) when you turn the key to the start position ? Did you check for spark ? Spray carburetor cleaner into the engine through the throttle plate , if it has spark an starts with carb cleaner you have a fuel pump problem or electrical . Videos on you tube on no start trouble shooting .

Sep 30, 2016 | 2007 Dodge Dakota

1 Answer

2000 ram 2500 5.9 gas motor. Drive down the road and it shuts off gauges are still on. No loss of electronics wont restart until the fuel gauge reads. New fuel pump tps and crankshaft position sensor.


When problem is ongoing, if it cranks good but won't start, have a helper crank it while you visually check for spark at the spark plugs. If spark everywhere, use a gage and check proper fuel pressure and fuel injector pulse.
How long since a tune-up? Any applicable trouble codes? At the moment, I'm not sure what the fuel gage has to do with it? You could check voltage and ground for the fuel pump and fuel gage sending unit. I haven't looked at any of your wiring, yet.

Apr 01, 2016 | Cars & Trucks

2 Answers

Check gauges light on, Temp gauge at 0, vehicle wont start.


Could be connected, but could also be two different problems.
It could be something in the key switch, or a wiring problem. Or it could be a wiring problem with the temp gauge and something else causing the engine not to start.
Do you have spark and fuel pressure at the injectors ? And does the gas gauge work ?

Nov 11, 2015 | 2003 Jeep Grand Cherokee

1 Answer

What's your question? Replaced timing belt on 2001 dodge stratus 2.4 liter and still wont start


Have you checked for spark on a plug wire with the engine cranking? If no spark, the problem is in the ignition system- the ignition coils, the ignition control module, the plug wires and plugs, the crankshaft position sensor, and the PCM-all are parts of the ignition system. Don't replace without testing- it will save you money.

Also check the fuel pressure at the engine, or at least verify the fuel pump is getting gas up to the engine. If you turn the key to on, not start, the fuel pump should turn on for 2 seconds to put pressure in the line and in the fuel rail where the fuel injectors are. Do you see a valve on the fuel rail, it may have a cap screwed on it. This is the test port to hook up a fuel pressure gauge and check fuel pressure. Autozone and others loan or rent fuel pressure gauges.

Mar 24, 2015 | 2001 Dodge Stratus

1 Answer

1992 dodge dakota wont stay running


Have you checked base fuel pressure with a gauge ?
Code 42 is a problem with the fuel pump relay or ASD relay circuit.

Jun 22, 2013 | 1992 Dodge Dakota

1 Answer

1999 dodge ram 1500 4X4 air bag light, check gauges light, oil pressure and gas guage all came on. Then they would all go out. Now truck will not start.


Well the air bag light would not have anything to do with the engine. The warning light for the gauges would come on if the gauges needed attention. And that would happen if the engine died.
When you turn the key on, does the gas gauge register ?
Do you have spark and fuel pressure when you crank the engine ?

Aug 06, 2012 | 1999 Dodge Ram

1 Answer

99 Taurus Wont start unless gas is sprayed into the intake


check out the injectors and the coil pack to make sure you are getting spark

Mar 08, 2009 | 2000 Ford Taurus

3 Answers

2000 GMC Sierra cranks wont start


Hello, 9-10 volts is not enough to keep a modern vehicle running. Taking in consideration the age and model of this truck, it could easily be an alternator failure.
I hope this helps.
CYA Gator241

Feb 07, 2009 | 2000 GMC New Sierra 1500

Not finding what you are looking for?
1998 Dodge Dakota Logo

478 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...