Question about Chevrolet S 10

1 Answer

Driver window won't go up; fuse ok; how do i remove door panel

Drivers window won't go up. Only drivers window. Fuse is good as other items are functioning

Posted by on

  • Corey Morgan May 11, 2010

    need the year make and model

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Chevrolet Master
  • 3,854 Answers

Before you remove the door, check the switch it self. If you have a newer S10 like a 1994 and newer. The window switch panel just popes out from the arm rest with out removing the door panel. Try moving the switch from side to side while pushing the up button and check the wire in the weather boot that runs between the door and body at the hinge.
Good luck and hope this helps.

Posted on May 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the fuse number for driver's side window and where is it located?


If the other windows work ok, I don't think the problem is the fuse or relay, because they use the same fuse circuit. In my opinion, something wrong with driver side window motor. You use that one the most, so usually goes out first.
I can't rule out the master switch, at the moment. You may have to get at driver side window motor to do some testing, which means you have to remove door panel.

Mar 31, 2016 | 2000 Ford Taurus

1 Answer

Tail lights, passenger (front passenger and both rear) windows, inside door lock switch and fog lamps are all not working.


These items are on separate circuits. Check the power lead into the drivers door first. No power, or a broken wire to the drivers door in the hinge area can cause window and door lock issues. Tail lights are a separate fuse as well as fog lights. Check fuses to make sure they are all good. Some vehicles combine low amp draw circuits. The fuse may NOT be labeled for the specific item you are attempting to repair.

Aug 31, 2015 | Cars & Trucks

1 Answer

Drivers door control panel (power window heated seat locks ect ) what to do none of it is working 2006 chevy trail blazer


Check fuse #10 in the rear fuse panel. If fuse OK, try switching passenger side control module into driver's side. Also check for broken wires in wiring harness that goes between body and driver's door.

Sep 03, 2011 | 2006 Chevrolet Trailblazer

2 Answers

Driver side power window doesnt work


Its possible, check underhood fuse box, the position 6, 60AMP for Power Windows

Other details can find in the Ford-Explorer-Owners-Manual (page 187 and next)

If the fuse is OK, take off the trim panel to check the windows motor, windows switch and wires.

Hope helps (remember rated this).



Jul 23, 2010 | 2003 Ford Explorer

1 Answer

2005 colorado pulled fuse for power locks, to stop automatic locks. drivers window and door locks quit working. reinstalled fuse but didn"t start working again.????. fuse is ok drivers window and locks...


This is a common problem, there is either a pinched wire in the harness that is in the door jam or your fuse block is shot, there is a gm service bulletin out on this, I would call your local dealership to find out if it is covered.

Jan 30, 2010 | 2005 Chevrolet Colorado

3 Answers

Toyota prado 1996 electric window and mirror on drivers side is not working. Whole drivers door window control panel and also mirror on that side) Is this a fuse? If so where is fuse?


the fuses for the windows will be in fuse box, it sounds like possible water intrusion,the fuses should all be marked, if they are all good,you may have to remove the door panel to check for any damage at door switches

Dec 14, 2009 | 1996 Toyota Land Cruiser

3 Answers

96 Honda Civic 4 door sedan back passenger window doesn't work with master switch on drivers front door but it does work with the button on the back door. Also front passenger window doesn't work at all...


the wires at the door jamb connector get brittle and crack and break, causing all manner of oddities. and it can certainly be intermittent. like your window rolls down with the door open, but does nothing if the door is closed. wires may need to be repaired or replaced with that molex style plug/connector in the door

Aug 11, 2009 | 1996 Honda Civic

Not finding what you are looking for?

Open Questions:

Cars & Trucks Logo

Related Topics:

683 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...