Question about 1991 Dodge Dakota

1 Answer

Need diagram for serpeteen belt on dodge dakota 1991 5.2 littre engine

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Please visit THIS PAGE - since you did not specify A/C or No A/C

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Posted on May 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need diagram for serpentine belt


Here's a link to your vehicle. 1996 Dodge Dakota Serpentine Belt Routing and Timing Belt Diagrams Your vehicle has 3 different engine sizes.

Jul 29, 2015 | 1996 Dodge Dakota

1 Answer

Putting on belt


this is the serpentine belt diagram for a dakota 5.2L if thats not what size motor you have let me know what size it is and ill post that one...2008-05-15_213219_routing.png

Mar 20, 2013 | 1991 Dodge Dakota

1 Answer

How to put belts back on a 1991 dodge dakota


There should be a sticker on the hood or the radiator support.
You can also go to dayco or gates belts online.

Jul 08, 2012 | Cars & Trucks

1 Answer

I have a 91 Dodge Dakota ext. cab. It has 4 v belts on the engine. Is there a certain order that they have to come off and be put back on? I can draw a diagram of the parts that each belt goes to, but if...


Hi Cheryl; On regular v belts it's always good to start with the front belt and work your way back, then mark the belts you have in the order you pulled off in. Making diagrams is the best way Not to have problems it is easy to get confused which belt go where. Please Make A Diagram that you can use carefully identifing which pullys for which belt. Also check belts for cracking slight cracking is ok but cracks you can easily see is better to replace while you have them off than break down later and kick yourself for not replacing them then, if it's been a while since they were replaced do it now.

Oct 13, 2010 | 1991 Dodge Dakota

1 Answer

Need diagram for drum brakes on 1991 dodge dakota 6cl 2wd


Try this video:

http://revver.com/video/186925/dodge-dakota-rear-brake-replacement-video-part-1/

Jul 03, 2010 | 1991 Dodge Dakota

1 Answer

Looking for firing order diagram for 1991 dodge dakota 5.2l engine


Hi there .

the firing order for the 5.2l v8 is
1-8-4-3-6-5-7-2
Hope this help

Aug 29, 2009 | 1991 Dodge Dakota

1 Answer

I need a belt diagrame for a 3.5 mitsubishi


autozone.com has some great diagrams! It sure helped me when I had to figure out how to put on my new compressor belt! Hope this helps!

Aug 04, 2009 | 2002 Mitsubishi Montero

2 Answers

Serpentine belt on 1992 dakota


You don't mention which engine you have in your '92 Dakota, but it's likely the 3.3L and if so, here's the diagram. Even if your engine is not the 3.3L the principals for replacing the belt are the same.

Get a serpentine belt tension release tool (local parts store) and use it to take the tension wheel away from the belt, which will make it loose enough to remove by simply pulling it off one of the pulleys (the alternator will be easiest) and then wiggle it out of the engine bay. The tool should come with a selection of heads for the different variations of tensioner arms/bolts. Once the belt is removed, replacing it is the reverse process.

Hope this helps, and please rate my answer.

2e5cb67.gif

Jan 08, 2009 | 1992 Dodge Dakota

Not finding what you are looking for?
1991 Dodge Dakota Logo

Related Topics:

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...