Question about 1998 Chevrolet Cavalier

2 Answers

I have a 1998 cavilier i have no low beams,fuses checked good

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Either the wire for your low beams has a short in it or you might have to replace the switch in your steering column and that should fix your problem.

Posted on May 12, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Chevrolet Master
  • 3,854 Answers

 I’m inclined to believe you have a headlight switch problem and here’s why. There are 2 fuses one for each of the headlights on the vehicle. For the daytime running lights (DRL) to operate the fuse and wiring to the right head light has to be good, because it supplies the power for both headlights in the DRL mode. The fuse and wiring for the left headlight has to be good because the DRL relay needs power from that fuse to operate. The DRL relay in turn provides a path through the left headlight and wiring to ground. When you pull back on the dimmer switch, you are activating the flash to pass circuit of the headlight switch assembly. Because the flash to pass mode works you then know that the high beam wiring and headlight bulbs are in good condition. This also tells you that the ground circuit for the headlight switch is good. In many newer vehicles, the headlight switch doesn't provide power to the lights. The headlight switch has now become the path to ground to complete the circuit. The headlight switch and the high/low beam dimmer control are one assembly so when you replace one you get the other free. Such a deal! My coffee bet is on the headlight switch assembly.

Posted on May 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No highbeams low works fine. changed switch but still the same fuses are good. help


98 Explorer No High Beams Problem - Ford Explorer and Ranger ...

https://www.explorerforum.com/forums/showthread.php?t=374129

Nov 15, 2012 - 16 posts - ‎8 authors
98 Explorer XLT 4X4 - No high beams. I've read thru many threads here and other places about this. Pulled and checked every fuse - all good ... Fog Lights Off When High Beams Activated - Normal?
19 posts
Nov 30, 2015
Headlights not working (not MFS, Fuses, or bulbs)
12 posts
Feb 24, 2015
97 explorer no low beams high beams
3 posts
Nov 4, 2013
no headlights in 96
15 posts
May 7, 2009
More results from www.explorerforum.com

Jan 03, 2016 | 1998 Ford Explorer

1 Answer

High beams do not work


I had this issue as well. My headlights did work but the high beams didn't. I replaced the high low beam switch under the dash bolted to the steering column. Go to rockauto.com and it'll be under your vehicle under electrical switches. The switch heats up and gets stuck in high or low. Common problem. Good luck!

Dec 13, 2014 | 1998 GMC Suburban

1 Answer

Hello, The low beam on the headlights of my 1998 Chrysler Sebring do not work but the high beams do. Is the problem a bulb or fuse and how do I replace the part?


it is most likely a blown fuse as the HIGH & LOW beam lights may have separate fuses, check the fuses in the fuse box under the hood or under the dash...... hope this helps......cheers.

Sep 22, 2011 | 1998 Chrysler Sebring

1 Answer

98 caviler low beam


98 caviler high beam left side dosent work canged bulb checked fuse and all good

Feb 06, 2010 | 1998 Chevrolet Cavalier

1 Answer

Low beam headlamps wont turn on change bulbs and checked fuses and still wont come on.


did you check for a relay in your fuse panel? there should be a relay that controls your low beams and one for your high beams. check for that and then if high beams are working swap it with low beam relay. if your problem switches to low beams working and high beams not working replace the bad relay.

Jan 26, 2010 | 1998 Ford Explorer

1 Answer

Driver side low beam not working


You will need to change the bulb.

Dec 21, 2008 | 1998 Honda Prelude

2 Answers

Low beams headlights


Hi! I had the same kinda problem. I changed the bulb itself.Good luck. T.

Dec 11, 2008 | 1998 Chevrolet Metro

1 Answer

Low Beam


Make sure you have a good switch
bulbs good
relay and or fuse is good

Jul 02, 2008 | 1998 Volkswagen Cabrio

Not finding what you are looking for?
1998 Chevrolet Cavalier Logo

615 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...