Question about 1996 Chevrolet K1500

2 Answers

How do i remove the panel on a 1996 chevy silverado 1500 power window

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 316 Answers

Start by disconnecting your negative battery cable. Then you need to locate and remove the screws that hold your interior door handles in place (they may be hidden by snap in, or snap on clips). Once you remove the screws that hold the door handles, remove any wire connectors to the handles. The door panel itself, is held on by snap in clips, and you will need a small pry bar to pull them from the door (try to get as close to, or directly under the clips to prevent them from tearing out of the door panel). Once the clips are removed from the door, pull the panel upward to remove it from the door.

Install in reverse.

I hope this helps you, and I wish you luck on your repair

Posted on May 12, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,533 Answers

Try this website to see if they have your truck listed its www.alldatadiy.com and you be able to get pictures and diagrams showing you how to repair your truck if you every have any hard to find GM-parts give these guys atry its Schram auto & truck parts 1-800-292-1032 and they website is www.schramauto.com and i hope i have been some help to you Michigan Man

Posted on May 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Door panel removal


there should be screws near the inner handle and check around the perimeter of the plastic panel

May 02, 2014 | 2006 Chevrolet Silverado 1500 2WD

1 Answer

Repairing the lock on a 1500 chevy silverado year 2000


remove the door panel and see if theres power to the power lock actuator is so the actuator is bad if not power locks remove the door panel and check the linkage rods

Aug 14, 2012 | 2000 Chevrolet Silverado 1500

1 Answer

1999 chevy silver ado passenger side power window wont go up it does have power


Remove the two armrest screws,slide the armrest towards the back of the door to remove.Remove the "triangle" cover that covers the standard mirror attachment screws.Use a small screwdriver to pop the clips on the window switch,and unplug it.I believe the rest of the panel is just secured with clips(I replaced the inside driver door handle on my work truck with my own home made steel replacement handle recently,but it has manual windows)

Jan 02, 2012 | 1999 Chevrolet Silverado 1500

1 Answer

2000 chevy 1500 door panel removal with manual windows and locks?


to remove window handle get a hanger and put a small bend in it slide it behind the handle and hook the clip and pull the handle will come off. purchase a panel removal tool to pop the clip out of the door. and lift on panel and it should slid off.

Feb 09, 2010 | 2000 Chevrolet Silverado

2 Answers

Passenger window on 2001 chevy silverado won't go up


probably your switch CHECK IT with a volt meter

Aug 28, 2009 | 2001 Chevrolet Silverado 1500

1 Answer

Where is the fuel pump shutoff switch located on a 1996 chevy silverado 1500 located


Should be on the passenger side kickplate below the glovebox and to the right. You may have to remove the plastic panel to access it or look for a small hole in it and feel around for the button

Apr 23, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Door panel removal


The book says 1. remove panel pull strap 2. remove door handle bezel 3. on 1995-2001 models,remove power accesory panel and trim panel upper extension. 4. remove armrest screws and pad. 5. remove window handle,I guess if not power windows.
KD makes a tool to go in between door panel and door to pop the door clips loose. KD 3705
You will also have to have a window crank tool if it is manual window. KD431
Hope that will help.

Mar 23, 2009 | 2001 Chevrolet Silverado 1500

3 Answers

1988 chevy silverado fuse box


I hope this helps a little, you said the fuse box panel is gone....so how do you know some fuses are missing?

I just bought a 1988 silverado also, the wipers ,power windows and windshield washer fluid only work "when they want to" I think I have a bad ground somewhere.

2763fd2.jpg

Aug 06, 2008 | Chevrolet Silverado Cars & Trucks

Not finding what you are looking for?
1996 Chevrolet K1500 Logo

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...