Question about Mercury Sable

3 Answers

Scraping pulse noise r front merc sable

97 merc sable noise in front end since tire change, a thumping grinding noise..thought it was brake pads or lack there of, on discs... replaced both disc and pads ,noise on the right still. changed tires back to front...no dif the noise goes away when turning left

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 957 Answers

Check the condition of the wheel bearings, front and back side if the brake rotor, and the back side of the rim. Everything should be clean, rust build-up can throw everything out of true. The hub or wheel-bearing should be tight and smooth when spun.

Posted on May 12, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

If the noise goes away when you are turning its a front wheel bearing that's making all the noise your car has hubs on it and. It very hard to tell if there bad while there on the car as the axel nut holds every thing tight

Posted on Oct 26, 2013

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 42 Answers

Check to see if dust sheild is robbing rotor

Posted on Mar 01, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2006 AWD ford five hundred - has a thumping feel whenapplying the brakes - replaced both front wheel hubs - both front rotors and brake pads - still have a thump that co-insides with the spee


if you have mis-matched tires on your car fix that FIRST.

then re-analyze your problems then and only then.

if you have already taken care of this then you say a thumping and not a pulsating feel ???

Sep 15, 2014 | Cars & Trucks

1 Answer

Thumping, grinding noise comes from right front side


most likely a front hub [wheel bearing ]going bad but jack up front side that is causing problem and try to move tire in and out with hands at top and bottom of tire and listen and feel for noise or excess movement it to much movement remove tire an check the upper and lower ball joints as well as the shock/strut but check brakes grinding can also mean pads are metal to rotor but usually grinding and thumping is related to a bad hub

Mar 31, 2013 | 2005 Chevrolet Cavalier

1 Answer

Noise in left front wheel


Grinding noise, growling noise, thumping noise? Something else? If it's a grinding noise, more than likely it is during stops. In this case it is probably metal on metal in the brake pads. If it is a growling it can be in the wheel bearing or CV shaft which usually gets louder with turning or banking. Is it is a thumping can be from a tire issue, a strut, a sway bar link banging around etc. Need to clarify the noise and how you are hearing it.

Mar 08, 2013 | 2003 Buick Century

1 Answer

Loud noise in the front wheel


first, check your brake pads, the grinding starts when the pad is worn to the rivets that hold it, then the pad starts to crack and break away. once the pad is gone there will be play that allows whats left of the pad to move around.. causing the thump, there should also be some change under braking, like going from a thump to a grind

this could also be wheel bearings.. but my guess would be the pads, and if it got to that point.. i would bet that the rotor is shot as well

Jan 30, 2013 | 2004 Oldsmobile Alero

1 Answer

What could cause a thumping noise from the front end when turning at low speed?


sounds like wheel bearings-1st
but hopefully your front disc need turning, or replaced.
check wheel bearings by jacking up the front end "CAREFULLY" WITH
JACK STANDS & wiggle tires,if you get more than a 1/4'' slack on 1 or the other, than it's shot. Best to replace both sides. "GOOD LUCK'' &
BE CAREFULL.

Aug 22, 2012 | 2009 Hyundai Elantra

1 Answer

I'm driving a 2000 Chrysler 300M. Had front brake pads & rotors changed 2 weeks ago. Front end has been noisy since & I suspect sticking calipers , as i was informed they did not get clean


The front calipers are not the problem...did a shop replace the pads and rotors? Or did a friend replace these parts. The Chrysler front pads and rotors are an excellent design...easy to service and replace parts...only 2 bolts hold on each caliper, and the rotor is held in place with the caliper, and wheel. My first thought was a front wheel bearing is grinding, but you should have noticed this before the brake parts change. The pads could be installed backwards also...my second thought was you may have a loose wheel or two...retighten all 5 lug nuts by using the "star" tightening method, you may be surprised that the loose lug nuts are the only problem. Hope this helps.

Jul 12, 2012 | 2000 Chrysler 300M

1 Answer

I had a constant grinding coming from front passenger tire. Replaced Caliper and put the worn pads back on for a day, the constant grinding went away. It would still grind while braking,hitting a bump


It sounds like the brake pads are metal to metal, when you turn the flexing of the wheel makes them touch the rotor and grind. This can rarely be caused by a badly worn wheel bearing as well, have both brakes and wheel bearing inspected.

Mar 02, 2017 | 1999 Pontiac Grand Am GT

1 Answer

Sound like tire scrubbing and grinding on right front 2004 ford explorer


Get your brakes inspected - the grinding noise may be the front disc brake pads, which have worn out. Several national chains offer free estimates for brake repairs. They will also check the other front end components, which could be causing the noise.
Hope this helps...

Jan 07, 2012 | 2004 Ford Explorer

2 Answers

Front end making rattling, thumping noise when driving. Slowing of speed increases the noise.


i would 1st check out the front tires to make sure that they are not defective, if tires check out ok, then i would put the jeep on a rack at a garage, and check out all of the front end components, including c. v. joints and the wheel bearings.

Jun 24, 2011 | 1994 Jeep Grand Cherokee

1 Answer

Front end noise when turning. almost sounds like


There are a couple of things to cause metallic sounds when turning. First thing, is if it's a clicking sound when you turn, then you have a cv joint going bad. It's usually more prominent when moving in reverse, however it can happen just as well while moving forewards. Secondly, if it's more of a grinding or scraping noise, we have a couple of options. The sound could be coming from the brakes, if they're worn or have grit stuck in them, or it could be bad bearings in the front wheel hub. The wheel hub has a tendency to making a whining noise when driving; usually most easily heard when driving past buildings. They can also allow the tire/wheel to present the appearance of leaning when looking at it. If bad enough, it can even rub on the brake caliper, or cause the disc brake rotor to wear out the brake pads prematurely. So, to recap: Check:
CV joints, if a clicking sound brakes or wheel hub bearings if grinding or whining sound.

Oct 19, 2009 | 2000 Jeep Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

719 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

fordexpert

Level 3 Expert

5470 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...