Question about 1989 GMC Sierra

1 Answer

Rusted I am thinking of buying a 1989 GMC pickup. It is highly rusted on the part by the box, i don't know what this part is called but its right infront of the box. I wanted to know the average cost it would cost to fix this problem.

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 91 Answers

I have the same truck, there is alot of part availiable at cheap costs. i belive what you are talking about is a cab corner. they are about 50 bucks. you can do body work youself with basic hand tools and a welder (more serious)
all in all you can probably do it your self for under 100 bucks

Posted on May 12, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1990 gmc pickup 350 eng rough idle and idles a little high then low new cap rotor wires plugs

Chexk everything and then recheck. I have seen brand new caps bad right out of the box. Also check for any danged pkuga. I've Seen Those CRACKED New Out THE Box.

Jul 27, 2016 | GMC Cars & Trucks

1 Answer

1989 suburban front bumper

Sara, 1989 GMC Suburban front bumper removal. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How To Install Replace Bent Rusted Front Bumper 1989 99 Chevy GMC Pickup...
Grille Replacement 88 98 Chevy trucks
1989 Chevrolet R1500 Suburban Parts NationalGMParts com

Jul 10, 2016 | 1989 GMC Suburban

1 Answer

I have a 1989 Toyota Pickup 22RE Engine 5 Speed Manual Transmission - The problem is that the clutch slips on higher gears especially on cruise control when I encounter a hill. Can you tell me if there is...

If it's a hydraulic operated clutch, as I think it is, then no, there is no adjustment. Only the cable operated clutches were adjustable. But there is a clutch pedal height and free-play adjustment that needs to be correct. Freeplay distance is 3/16 to 5/8 inch, adjusted at the pedal end of clutch pushrod. I don't know the pedal height for your pickup (you'll have to ask some toyota person), but the adjustment is made near top of pedal where it contacts the stopper bolt.

Nov 07, 2011 | 1989 Toyota Pickup SR5

1 Answer

I have a 1991 toyota pick up that won't start. I have spark the and it seems as the truck wants to start but i don't think its geting fuel. Fuel preasure is good. what should i check next?

An injector pulse tester is called a "noid light". You plug it into the injector connector, and, cranking, it should flash, or blink. Try it on each injector connector.Buy them from any parts store. Blinking light means you are getting power to the injectors. The igniter tells the computer when to ground the injector signal, so it will operate and spray fuel into your cylinder. goodluck.

Oct 11, 2011 | 1989 Toyota Pickup SR5

2 Answers

I have a 1989 gmc sierra 1500 pickup. 4.3 v6. i recently went to purchase the fuel injector and was asked if i needed 2 of them while checking out at the store. does this truck have 2 injectors that need...

Yes it is a throttle body injection,looks very similar to an older style carburetor,warning! Do not turn ignition key on during removal of injectors,remove negative battery cable before removal,lightly coat rubber orings with petroleum jelly before installation.

Sep 22, 2011 | 1989 GMC Sierra

1 Answer

What kind of transmission fluid do i use and how much for a 1999 gmc shortbox 4by 4 pickup truck

Don't know if you have an automatic or a 5 speed. IF you have your owners manual it is listed in it. IF not call a Chevy dealer and they will tell you.

Apr 22, 2011 | 1999 GMC Sierra

1 Answer

1989 toyota 4x4 pickup 3.0l truck will shift in 4high or low ,i jacked the rear end up put the truck in 4 wheel high, tne transfer case shaft is turning to the front differential but the front shafts or...

you probably have a problem with the differential in the front it might be no good it looks like a rear end pull the cover off and check the gears

Aug 21, 2010 | 1989 Toyota Pickup SR5

1 Answer

Need specks for timing a 1989 gmc 2500 v 6

need engine size 5.0/ with or without deistributor without dist it is automatic with could be anywhere between 3-12*BTDC (before Top dead center)

Jan 21, 2010 | 1989 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

76630 Answers


Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides