Question about 2004 Mini Cooper

2 Answers

My third brake light is out and needs replacing

My third brake light on my mini cooper 2009 hatchback is out and needs replacing how do I remove the old one and replace it? I removed the three screws at the back of the light but although its loose it cannot be removed for some reason can you help me please?

Many thanks George

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How to get center rear brake light to work

Posted on Oct 02, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

If I remember correctly, you need to pop off the plastic trim panel on the inside of the trunk to access the wiring. Just unplug it after removing all the screws and it should come out.

Posted on Aug 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My friends mini clubman 2009 running jerky would welcome any ideas please


Tune up would be the first place I would look into. All filters as well, air, oil, fuel.

Mar 15, 2016 | 2012 Mini Cooper Clubman John Cooper Works...

1 Answer

2008 mini Cooper code CC-ID 071


71
*
Dynamic Stability
Control (DSC)
Brake pads!
Replace
Brake pads
The brake pads are worn.
Have them replaced by the nearest BMW Service.

Feb 24, 2012 | Mini Cooper Cars & Trucks

1 Answer

Yellow light burning


That is the brake pad wear indicator. Probably need to have your front brakes and the brake sensor replaced. Might be rear brakes, but they don't wear out as often.

Jul 12, 2010 | 2004 Mini Cooper

1 Answer

2009 mini cooper S - Fuel Injector Problem


Be thankful its under warranty. You needed four injectors usually 185.00 each plus labor.

May 21, 2010 | 2009 Mini Cooper

1 Answer

2009 Mini Cooper Clubman JCW Factory Stereo Wiring Diagram


Just had starter changed on Mini Cooper S '06. Tried to start the car after come back from shop and: outside and dash lights are flashing, window goes up and down but the engine wont start. Help solving this mistery.

Mar 22, 2010 | 2009 Mini Cooper

2 Answers

2004 Mini Cooper Indicator light problem


BRAKES! Replace your brakes NOW. You have less than 2MM of pad lining on (most likely) your front brake pads. No brakes, no stop. No stop, no MINI.

Jul 19, 2009 | 2004 Mini Cooper

1 Answer

How do I replace the 3rd brake light red cover on my 2006 Mini Cooper S, I can't tell if the lens is separate from the light fixture or if it is a all-in-one pop in unit with lens attached.


It is all in one light fixture with lens. Open the rear hatch and there are three either T-20 or phillips heads that hold the third brake light. Remove all three and remove the light, disconnect the connector plug and install the new light.

May 18, 2009 | 2006 Mini Cooper

1 Answer

2007 Mini Cooper Convertible Brake Lights


Sounds to me like the brake light switch is shorted and needs to be replaced. The brake light switch should be under the knee bolster above the brake pedal. Go to your nearest dealer and get a brake light switch and swap it out.

May 11, 2009 | 2007 Mini Cooper S Convertible

2 Answers

2004 Mini CooperS- brake service light stays on


Did they replace the brake pad wear sensor? If so, try leaving the key in the on postion for 30-45 seconds (dont start the car) This is how we reset the lights on BMW's and the Mini's use a similar system for service lights

Mar 12, 2009 | 2004 Mini Cooper

Not finding what you are looking for?
2004 Mini Cooper Logo

622 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mini Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Mini Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...