I am trying to get my car inspected and I'm trying to locate where my fuse should be place and what size I need. My owners manual didn't give me any of that info
SOURCE: won't pass due to emissions
O2 senser usually fail.
anything else fail??? did the inspectionstation tell you what need to be done to pass.??
do you have the print out of the inspection????
any machanic should be able to fix what ever the problem is.
SOURCE: 1999 Oldsmobile Alero lighter fuse location
there's one under the hood and one right next to the left of where your left foot would be in the driver seat as for the diagram i would suggest going to an auto store and asking for a print out they'll give you a free one if you buy the part from them. the lighter should be in the fuse box under the hood
SOURCE: emissions test on inspection
There is a slight possibility there maybe a leak in one of the fuel lines or in the top of the tank itself. Do you ever smell fuel? If you can get the car into a clean garage, lay some newspaper or cardboard under the car and with the garage door open WIDE run the car for about 5 minutes, then check the paper for any fluid drips. Try to whiff the scent of the fluid to your nose (try not to inhale it directly) and see if it smells like gasoline. Remember the location in which you found the leak and take it to a mechanic to have them look into it thoroughly, especially in the area that you found the leak. That's just one idea you can try. It'll also help you see if your car is leaking any other fluids also. I hope this helps and don't forget to rate!
SOURCE: cannot pass inspection. emissions.
go to a place like autozone or pepboy autoparts
tey will the code retriver myth have a factory code
that service is free,if they are code they will explane
wath next
SOURCE: Did not pass state inspection (vehicle)
First the fault codes,
U110C is No Fuel Level Bus Message
U0155 is No Cluster Bus Message.
Unfortunatly you have to be able to communicate with the instrument cluster with your scanner to diagnoise and I do not think an aftermarket scanner can do this.
298 views
Usually answered in minutes!
×