Question about 2004 Chrysler Sebring

1 Answer

Fog Lamp Bulb Replacement

Fog Lamp, 2002 Chrysler Sebring LXi. I have the replacement bulb for the light but when I look, it appears that there is quite a bit to remove to even get to the area I need. Is this one of the things I have to take in for a mechanic to fix or is there a "trick" to get behind the fog lamp?

Posted by on

  • Savage_Roze May 11, 2009

    Never mind. I found the screws on each side that need to be unscrewed and then wiggle the entire housing unit out and then you can easily change the bulb! Easy enough!

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There are a couple of screws in the front of the fog light that will remove the lense so you can replace the bulb.

Posted on Jun 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I change the interior light in a 2002 chrysler sebring


perhaps if you were to take a good picture and post it we would have a better idea, as I can not imagine a metal cover over the bulb unless it is some sort of heat shield .

Aug 21, 2012 | 2002 Chrysler Sebring

1 Answer

2002 chrysler sebring, the drivers tail light, running light portion of the bulb keeps blowing, brake and signal are fine.


Is your lense cracked where water can get into the housing? Are you absolutely certain that you are replacing it with the correct bulb? Are you using a good name brand bulb like Wagner or Sylvania? or some off-brand cheap bulb made in China?

Dec 18, 2010 | 2002 Chrysler Sebring

1 Answer

How do you replace the fog light bulbs on a 2004 buick regal?


Notes FOG LAMP BULB REPLACEMENT - FRONT

REMOVAL PROCEDURE
f98bf40.gif
  1. Remove the front bumper fascia deflector.
  2. Disconnect the electrical connector from the front fog lamp bulb/socket. CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
01c84b0.gif
  1. Rotate the front fog lamp bulb/socket counterclockwise to release.
  2. Remove the fog lamp bulb/socket from the front fog lamp assembly.
4065803.gif


  1. Install the fog lamp bulb/socket to the fog lamp rotating clockwise until fully seated. CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
b182709.gif
  1. Connect the electrical connector to the front fog lamp bulb/socket.
  2. Install the front bumper fascia deflector.

Jun 16, 2009 | Buick Regal Cars & Trucks

1 Answer

How to replace a fog lamp with replacement bulb only on 2002 toyota 4runner sport edition???? the three screws on the bottom?


Well, these are the steps and I will post the pic here in a second...looks like 2 screws...but like I said, you can see the picture for direction on this.


Remove or disconnect the following:

Front turn signal lamp
  • Connector
  • 2 screws
  • 2 claw fittings
  • Fog lamp assembly
  • Fog lamp bulb as shown
  • Fog light unit

  • To Install
    1. Install or connect the following:
      • Fog light unit
      • Fog lamp bulb as shown
      • Fog lamp assembly latch the 2 claw fittings and 2 screws
      • Connector
      • Front turn signal lamp
    Trying to post the pics now....

    May 14, 2009 | 2002 Toyota 4Runner

    1 Answer

    Fog light bulb replacement


    This bulb can be replaced without removing the washer fluid reservoir. There are 3 screws that go through the bottom edge of the bumper cover into the right inner fender guard. Remove these screws and pull the inner fender down to gain access to the back side of the fog lamp and remove the bulb.


    Nissan Scope Technician- 10+ years experience in Nissan dealership.

    Nov 04, 2008 | 2003 Nissan Murano

    1 Answer

    2002 Pontoiac Gran Prix 2002 GTP


    Yes, you can replace just the bulb. A local auto parts store may be able tell you which bulb you need or you'll have to pull the bulb out and take it in.

    Oct 18, 2008 | 2002 Pontiac Grand Prix

    1 Answer

    Fog lights are not working. I have no power to the violet/white tracer wire to multi-function switch. Where would this wires power source connection be? [If I power up green wire/pink tracer; fog lights...


    The lower Fog lights to my 2003 Chrysler Sebring Conv LXi do not work. And I do not have an owners manual to look at what fuse is what in the relay center near the engine. There are bulbs there in tact on the front ground effects. But they do not come on ever.

    Sep 22, 2008 | 2004 Chrysler Sebring

    1 Answer

    HOW TO REPLACE HEADLIGHTS ON 2000 CHRYSLER LHS


    ATTN: NIKKICARROLL

    here is how to replace the bulb in your vehicle


    1. Release the hood latch and open the hood.
    2. Remove the radiator closure panel sight shield as necessary to gain access to the headlamp.
    3. Remove the screws holding the headlamp module halves together.
    4. Separate the module halves.
    5. Disengage the wiring from the headlamp bulb.
    6. Remove the retaining ring from the back of the headlamp bulb.
    7. Pull the bulb from the lamp.
    To install:
    1. Push the bulb into the lamp.
    2. Install the retaining ring to hold the bulb in the lamp.
    3. Engage the wire connector to the back of the headlamp bulb.
    4. Place the module into position on the vehicle.
    5. Install the screws to hold the module to the vehicle.
    6. Install the radiator closure panel sight shield.
    7. Check the headlamp alignment and operation.
    88176gb1.gif Exploded view of the fog lamp with the bulb removed
    Click to Enlarge

    1. Release the hood latch and open the hood.
    2. Remove the radiator closure panel sight shield as needed to gain access to the headlamps.
    3. Remove the screws holding the headlamp module halves together.
    4. Separate the halves.
    5. Remove the fog lamp wire connector cover.
    6. Disconnect the wires from the fog lamp bulb.
    7. Disengage the retainer clip holding the bulb to the fog lamp.
    8. Remove the bulb from the fog lamp.
    To install:
    1. Place the bulb into position in the fog lamp.
    2. Engage the retainer clip to hold the bulb to the fog lamp assembly.
    3. Attach the wire connectors to the fog lamp bulb.
    4. Install the fog lamp wires connector cover.
    5. Place the module halves together.
    6. Install the screws to hold the headlamp module halves together.
    7. Install the radiator closure panel sight shield.
    8. Verify the fog lamp operation and alignment

    ATTN: WDSNEED1

    Removal & Installation 88176g87.gif Remove the screws retaining the headlamp module to the mount adapter
    Click to Enlarge

    1. Release the hood latch and open the hood.
    2. Remove the radiator closure panel sight shield as necessary to gain access to the headlamp fasteners.
    3. Remove the screws holding the headlamp module to the mount adapter.
    4. Separate the headlamp module from the mount adapter.
    5. Disengage the wiring from the headlamp and foglamp.
    6. Remove the headlamp from the vehicle.
    To install:
    1. Attach the wires to the headlamp and foglamp assembly.
    2. Place the headlamp module into position on the mount adapter.
    3. Install the screws to hold the headlamp module to the mount adapter.
    4. Install the radiator closure panel sight shield.
    5. Check the headlamp alignment and operation.

    Jul 28, 2008 | 1994 Chrysler New Yorker

    1 Answer

    How do i change the headlight bulb in a 2005 sebring convertable


    Lift up the hood, the bulbs are changed from the engine compartment
    behind the lamp are connectors, pull it off, and the retainer that holds the bulb in
    replace bulb
    replace retainer
    replace wire
    close hood
    usually takes longer to type than to do

    Jul 14, 2008 | 2004 Chrysler Sebring

    Not finding what you are looking for?
    2004 Chrysler Sebring Logo

    439 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chrysler Experts

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8548 Answers

    Are you a Chrysler Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...