Question about 1997 Dodge Dakota

1 Answer

97 dodge dakota stop lights not engaging, bulbs good

Cop pulled me over, said stop bulbs not working, ckd bck ups/ work, park& headlights lghts/work, turn signals/ work/ but no action for brake lights when pedal depressed ... what should i fix?

Posted by on

  • Andy May 19, 2009

    and the switch is connect to a fuse in the engine bay, which i found was blown - replaced fuse and now stop lights work!

  • Samuel Charles Spriggs May 11, 2010

    I would first suspect the brake light switch.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 14 Answers

At the brake pedal the is a switch, when you press the pedal moves away from it which turns the lights on

Posted on May 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Headlights dont work


look at the fuse or a broken wire/s

Aug 23, 2014 | 1997 Dodge Dakota

2 Answers

1994 dodge dakota my headlights and tail lights and brake lights don't work my abs and parking brake lights are on my dash lights don't work either I replaced the headlight switch and still no


These are all different circuits. The brake lights are on a 10amp fuse - the headlights are on a 50amp fuse - and the parking and dash lights are on a 20amp fuse.
Do you have power going into the headlight switch and the brake light switch ?

Jan 29, 2013 | Cars & Trucks

1 Answer

Turn indicator problem


check for a burned out park light some cars wont blink if you have a bad bulb some bulbs have 2 filiments one for pak lights and one for blinker

Feb 23, 2012 | 1997 Dodge Dakota

2 Answers

Can't find fuse for tail lights. Not in cluster by steering wheel, not in cluster under hood.


the rear tail lights, license plate bulbs, and the front park lights are all fed off the same fuse. I show fuse one in the dash fuse block (15 amp). If the front amber park lights are working its not a fuse.

Are you sure the bulbs are good? Have you checked the connections in the harness?

Sep 29, 2011 | 1999 Dodge Ram 2500 4WD

1 Answer

97 dodge dakota. Tried to replace the heater


There is some wire shorted to ground during the dash work due to some pinched points. Need to revisit the re-installation work.

Dec 12, 2009 | Dodge Dakota Cars & Trucks

1 Answer

How do you get in to change the headlight bulb on the 2004 Dodge Dakota


Remove the single torx screw holding the parking lamp assembly to the headlamp assembly. Remove the parking lamp bulb and sockets from the main assembly and set aside. Remove the three bolts holding the headlamp assembly. Pull the headlamp assembly forward off of the alignment pin and disconnect the harness from the back of the bulbs. Turn the bulb holder and pull the bulb out. Replace in reverse. Total replacement should take 15 minutes. Gregg
>
Thanks for the tips Gregg! Indeed, don't work anywhere but in front of the grill. Notes from my adventure:
You'll need a t-10 torx skinny screwdriver, and a 10mm socket wrench/driver.
Find the little torx screw near the bottom side of the headlight nearest the wheel and remove it. Tug and wiggle on the turn signal unit and it'll come loose. You'll find three 10mm bolts that hold the headlight unit in. More tug and wiggle and the unit falls free. After bulb replacement (don't touch the glass or finger oils can cause it break under high heat) replace the headlight unit. You'll see little plastic guides that the signal unit slides into- replace the unit and the tiny screw that holds it all in place. Replace the other bulb too, the second one takes a tenth of the time :)

Oct 08, 2009 | 2004 Dodge Dakota

1 Answer

Overdrive stopped working 97 dakota 318 auto


has the vehicle speed sensor been replaced? that is what controls when the trans shifts into od

Sep 14, 2009 | 2001 Dodge Dakota

2 Answers

Both headlights don't work....


Check for corroded ground leads for head lights first before you spend any more money, most time this is the cause.

Sep 05, 2009 | 1993 Dodge Dakota

Not finding what you are looking for?
1997 Dodge Dakota Logo

Related Topics:

313 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...