Question about 1994 Chevrolet S-10 Blazer
Blazer sat for a year (through a winter) because of tranny issues(would't shift out of first). Put a fresh battery in it and it started right up. Soon as I tried to move it it began running rough and misfiring spewing black smoke all the while. Put a little fresh gas in itand a gas treatment. Was able to get it started (had to keep it to the floor for a few moments) again but still rough and smoky and died a couple of times while trying to get it back off of the street. Want to get it running smooth again before I tackle the tranny..any idea where to start.
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
you need to replace the fuel pressure regualtor underneath the plenum , ck fuel pressure if it drops suddenly after you shut the engine down suspect fuel regualtor , use to have to replace the whole spider assembly now i think you can just replace the regulator
Posted on Dec 17, 2008
Check the fuel pressure regulator. generally "failure" position is full open which will richen up the fuel mixture. also check vacuum line to the regulator for cracks and good connection.
Posted on Jun 06, 2009
Tips for a great answer:
Dec 01, 2013 | 1998 Chevrolet Blazer
Oct 12, 2017 | 1989 Chevrolet K3500
Jan 25, 2012 | 2000 Chevrolet Blazer
May 18, 2010 | 1996 Chevrolet Blazer
Jan 27, 2010 | 1994 Chevrolet S-10 Blazer
Jul 10, 2009 | 1988 Chevrolet Blazer
Mar 04, 2009 | 1999 Chevrolet Blazer
222 people viewed this question
Usually answered in minutes!