Question about 1992 Honda Civic

1 Answer

I have a 92 honda civic, i let it sit for a week without starting it while i replaced the brakes pads, when i was finished i went to start it and it won't start. It was working fine before that.

Posted by on

  • Eric Rowh May 11, 2010

    Are you getting spark?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 192 Answers

Check and charge ur battery if necessary..

Posted on May 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My honda civic 2002 wont start no power/ battery died alarm went off. now emergency lights work and brake lights but nothing else


Check you Main Fuse, Did you try to Jump Start the Car when it went bad?

You now may have 2 issues you need to deal with...

Apr 16, 2013 | 2002 Honda Civic

1 Answer

92 honda civic wont start


You need to run a system fault code test, do that by following the instructions HERE, code are also listed at the site.

Oct 02, 2012 | 1992 Honda Civic

1 Answer

1991 Civic, replaced brakes, bled brakes, ok until I started car. brake pedal went down. is there a reservoir some where else beside the small one on firewall?


You may try to rebleed the breaks again, if that does not work.You may have problems with your master cylinder or brake power booster ? You may want to try to google your honda civic under brake repairs.I hope this helps

Feb 21, 2011 | 1991 Honda Civic

1 Answer

My honda civic wont start


check your distributor cap and starter fuse

Feb 22, 2010 | 1994 Honda Civic

1 Answer

The rpm on my 92 honda civic are to high


defenitly,also check for loose or broken vacum lines, and also check the ilde control valve or sensor.

May 30, 2009 | 1992 Honda Civic

1 Answer

Premature brake wear on my 2005 Honda Civic


try a different brand of pads. Civics aren't the best at pads lasting a long time. you need to go with a semi-metallic pad such as the O'Reilley auto parts "BrakeBest" brand.

May 29, 2009 | 2005 Honda Civic

1 Answer

92 Honda Civic after short run fails to start


The two most common things are the pgmfi (fuel injection) relay, and the distributors. Replace the relay first, not too expensive and a new one is peace of mind, if that doesn't fix it, my money would be on the distributor. The relay is a rectangular (1"x1"x2") box bolted way up under the drivers side dashboard. It will say "Mitsuba" on it.

Feb 21, 2009 | 1992 Honda Civic

1 Answer

Ford Freestyle Rear Brakes


no just change pads one side at a time when you finish start car and lightly pump pedal till you have a full pedal

Jan 08, 2009 | 2006 Ford Freestyle

1 Answer

Honda civic 2001


Remove rear wheels, remove rear calipers there will be two ten or 13 mm bolts on the back,(DO NOT LOOSEN THE LITTLE BLEEDER NIPPLE WITH THE RUBBER CAP ON IT!) pry the calipers back and off the rotors ,remove the old pads and get a c-clamp or big channel lock pliers and squeeze the caliper pistons back into the bores until they stop, now if your rotors are badly scored or rusty this is the time to change them there will be one or two #3 phillips head screws holding each rotor, remove these( you may need an impact driver with a phillips bit and a hammer) pull off the old rotors and reinstall the new ones after cleaning the rust protection off of them with brake cleaner and cleaning the rust from the hub where they sit., pull the rubber boots back on the caliper slide pins and lube them with clear silicon grease till they move freely, now use black hi temp grease to lube where the pads sit on the brackets(after cleaning the brackets of rust and dirt) and lube the backs of the pads (not the friction side make sure these stay clean!!) now reassemble and enjoy you just saved yourself a couple hundred bucks from the shop !! -jeff

Aug 09, 2008 | 2001 Honda Civic

Not finding what you are looking for?
1992 Honda Civic Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...