Question about 2003 Ford Expedition

1 Answer

2003 ford expedition shuts off on iddle, runs fine when moving

Starts up fine but as soon as you stay on iddle ( waiting for light) it shakes a few secends and then it shuts off, restarts fine

Posted by on

  • dftaylor0711 May 17, 2009

    I went and put it on the computer and it is the idle air control motor. costs about 150 bucks to buy part and another 75 to install.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Idle air control motor?

Posted on May 11, 2009

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2003 ford expedition drives fine, until it warms up, after it warms up, it cuts off in drive. But stay running in reverse, what's wrong? Somebody told me it could be my torque converter might be locking...


have you checked your tranny levels
if the oil is low when it warms up the torque converter will slip
but as soon as you put it in reverse there will be enough oil in the finns to move you backwards .

Mar 23, 2015 | 2003 Ford Expedition

1 Answer

2003 ford expedition 5.4 runs fine then motor just cuts off.


Security key or ignition faulty sounds like. Does it do it with both keys IF you have 2 of them? don-ohio

Jun 30, 2013 | 2003 Ford Expedition

1 Answer

2004 Ford expedition check engine soon light is flashing and car shakes hard when stepping on the accelerator


Your car is misfiring. You should not drive the vehicle while it is misfiring. If you want to DIY it you can start with you ignition system. Make sure all spark plugs, plug wires, and ignition coils are secure and in good condition.

Apr 07, 2013 | 2004 Ford Expedition

1 Answer

2000 expedition will not start.


Three fundamental things can happen: a bad fuel mix, lack of compression or lack of spark. Also check your starter or alternator.


-------------------------------------------------------------------------------
FGTech Galletto 2-Master EOBD2

Dec 19, 2012 | 2000 Ford Expedition

1 Answer

2003 ford expedition... shaking when driving and during stop. check engine soon light keeps flashing. recently had spark plugs changed.


will try to help.the shaking during braking may be a warped brake rotor,shaking while driving is in the wheel alignment. you have several issues to deal with.as far as the engine light flashing,check all your fluid levels in the engine. oil,low coolant, brake fluid,transmission fluid. top off fluids as needed. you can reset that engine light by disconnecting the positive cable from the battery for 10mins.this will reset the cars computer. but if you have a sensor or other issues,that light will come back on.the only way to know for sure is to have it code read a garage or dealership will be able to plug it in to get the codes for you.hope this helps and thank you for choosing fixya.com

Nov 29, 2010 | 2003 Ford Expedition

1 Answer

Ford 2003 Expedition EB. Check Charging System


Its probably the alternator. It will need to be tested on the vehicle with the engine running and the light illuminated. Measure the battery voltage with the engine running. It should be at least 13.5 volts. If it is lower have the alternator tested at a shop with a charging system tester.

Feb 27, 2010 | 2003 Ford Expedition

1 Answer

Loses power and starts chugging


i think its your computer. but first chek your alternator

May 31, 2009 | 1999 Pontiac Grand Am GT

1 Answer

Interior lights, lights on rearview mirrow aren't shutting off.


Spray some WD40 into the latches on the side of the doors then open and close the doors several times firmly.This will unstick the door adjar switch most of the time.Start with drivers door first.

Apr 13, 2009 | 2003 Ford Expedition

1 Answer

Service Engine Light staying On


Alot of times a voltage drop to the O2 Sensor can cause your check engine light to come on. Even tho the O2 sensor is wrong fine.

Feb 09, 2009 | 2003 Ford Expedition

Not finding what you are looking for?
2003 Ford Expedition Logo

Related Topics:

475 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...