Question about 2006 Chevrolet Equinox

1 Answer

Makes a sqeeking noise while turning or on bumps

Makes a sqeeking noise while turning or on bumps

Posted by on

  • Anonymous Mar 17, 2014

    2005 silverado sqeeks when i hit bumps

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 232 Answers

Suspension problem like a rubber bushing. Try recreating it, have some one push up and down on the front fenders one at a time, asuming the noise comes from the front. Try and spot where is coming from, if the part looks good spray it with lubricant not penetrating oil. Is best to replace what ever is making the noise.

Posted on May 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Audi a4 making a skweek noise in front when braking + making a kadoef noise in the back weal


get the front breakes checked incase they need replacing if they are ok you can try cleaning the rust of around the disks also taking the pads out and putting a bit copper grease on the backs of the pads might stop them from sqeeking some time a harder pad will make the sqeek any way but try the above it should stop hope this helps ivan

Oct 22, 2012 | 2001 Audi A4

1 Answer

2002 gmc truck water pump making noise how to stop noise


Gday mate, geoff here, could be the belt mate, try a bit wd40 / rp7 / crc, on the belt just a quick squirt or rub some soap on the V of the belt ,if noise persists could be the pump itself worn, does it have any lateral or dynamic play when wiggled, while engine off of course, hope this helps , geoff.

Feb 11, 2012 | GMC Sierra 1500 Cars & Trucks

1 Answer

2005 chevrolet suburban a/c blower is making a noise. Where is it located and can it be lubricated or do I have to replace it? The "sqeeky" sound varies with the speed of the blower and seems to...


The motor has sealed bearings. You need a motor but probably not the squirrel cage. The switch repair was to get the fan working and warranty wouldn't cover the fan.

Jun 25, 2017 | 2003 Chevrolet Suburban 1500

3 Answers

Loud squeek when hitting a bump and especiaLLY WHEN TURNING the steering wheel. when breaking car pulls to the left.


You may have bad lower ball joints.This a very common problem with theses cars .There is no way to grease them so the start to bind up after a while .If the squeak is there while turning the wheel and sitting still while doing this then suspect lower ball joints .

Oct 15, 2009 | 1997 Ford Thunderbird LX

1 Answer

Sqeeking noise.


sounds like u need a new belt may be dry rotted or just worn but also look at your belt pullies

Jul 12, 2009 | 2000 Nissan Pathfinder

1 Answer

2003 jeep cherokee 2.8 CRD engine sqeeking noise


It could be that you got some water on your serpentine belt and that will cause it to squeak. Try buying a can of "belt dressing" from an auto store and spray it all over your belt and see if that will stop it. It's a cheap and easy thing to try before replacing expensive parts. Hope this works for you, let me know how it goes. Goodluck!

May 05, 2009 | 2003 Jeep Liberty

1 Answer

What is the sqeeking noise from my front wheels on my honda acord


could be worn shocks or bushings on your control arms. It is possible to put a lot of stress on these bushings while changing cv axles and that can cause them to fail sooner than normal, but begins you car is 14 years old it is probably due for some new struts and springs up front anyway.

Feb 21, 2009 | 1996 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...