Question about 1994 Ford Mustang

1 Answer

When i start my 94 mustang it chugs for about a minute then it is fine. i think its a sensor somewhere but im not sure

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 76,846 Answers

U may have a defective fuel pump check valve, if this is the case the system looses pressure after the engine is shut off and then causes this problem u are having. to check this u must hook up a fuel pressure test gauge the fuel pressure test port on the top of the engine, it looks like a metal tire valve, this gauge cost's around $20.00 and is well worth the money, after the gague is screwed onto the test port run the engine and record the fuel pressure reading, then shut the engine down, the pressure should remove close to the running reading, if it drops more than 3 PSI you have a problem and need to replace the fuel pump which is located inside the gas tank.

Posted on May 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

94 Honda Accord made a chugging noise after turning it off and now it won't start up.


sounds like youre timingbelt snaped.pull the timing chane cover and inspect the belt. if so make sure valves are not bent. if timing belt is ok makesure battery has full charge hondas dont like to start on a week crank. if cranking are fine check the fuel pump.

Dec 02, 2013 | Honda Cars & Trucks

1 Answer

1994 mustang humming noise coming from intake


Check the vacuum hoses for leaks. Follow them around and make sure they're all connected and not worn out to where they had fallen off due to the hoses being old and worn out. Take some soapy water in a spray bottle and spray mist the intake and see if the idle changes. Check the big hose coming from the brake booster to the intake and make sure it's connected and in good shape. Basically check everything for vacuum leaks. It sounds like that's what you're issue is.

Mar 06, 2013 | 1994 Ford Mustang

1 Answer

I have a 94 Mustang 5.0, two problems , one my air bag light flashes on then stays on then disappears for a bit, second it doesn't want to seem to idle, you start it up it idles for a couple minutes then...


As far as the stalling is the tps sensor okay, check it to make sure its in spec, as far as the air bag light you will need to scan the codes and see what code is being stored in the system, its a 94 so you will need to count the flashes of the light and thats the code,also check the map sensor thats a common problem also with these, good day,

Apr 14, 2011 | 1994 Ford Mustang

1 Answer

My van stalls when i let off the gas?`


i have replaced most things on the van due to same issue.. im going to do the map sensor next.. good luck.. if questions, email me at meduso99@yahoo.com

Nov 09, 2009 | 1994 Chrysler Town & Country

2 Answers

I have a 2003 nissan altima 2.5S and it just died on me. Its been cutting off frequently and not wanting to start back up, I think its not getting fuel but Im not sure..I tried getting a jump but that...


It won't get fuel if the crank angle sensor goes out, because that's what triggers the fuel pump, once the ECM gets an input from this sensor it starts the fuel pump which will then allow the car to start. I know a crank angle sensor will kill one of these cars, I think think cam position sensor will just make one run like **** but I could be wrong. One of these sensors is sensors are your problem I'm leaning towards the crank angle sensor though.

May 09, 2009 | 2003 Nissan Altima

2 Answers

Cant get enough fuel pressure to run properly


May have to run in line fuel pressure gauge to determine if the fuel is losing pressure and causing this fault or wether you need to look else where like constant injector pulse,air flow meter,faulty distributor etc.

Feb 15, 2009 | 1994 Ford Mustang

1 Answer

Mustang


Your bushings in your starter are probly worn out. Its a fairly common problem on fords. My own mustang did it often as well. The starter is right near the exhaust manifold so sometimes when it cools down it works again a few times but you will want to get your starter changed out as soon as possible.

Nov 12, 2008 | 1987 Ford Mustang

Not finding what you are looking for?
1994 Ford Mustang Logo

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...