Question about Chevrolet Silverado 2500HD

1 Answer

Cannot get adjustable head rest off the seat

Hi, I'm trying to put seat covers on my 2001 Chevy Silverado and I can't seem to separate the head rest from the seat. It goes up and down but not off. Thanks, Cathy

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

On the plastic pieces surrounding the insertion hole on top of the seat back,there is a very very tiny hole on the side of this piece of plastic. You need to insert a rigid piece of wire or a very fine nail of some kind into this small hole and push until you feel it give, then pull up on the headrest. it should come out. You have to do this on each of the two insertion holes. It's easier with two people.

Posted on May 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2003 Chevy Silverado truck's back seat is stuck. I can't get it to fold down. Is there any trick to it?


flip the 40 side forward, then release the seat back on the 60 side so you can get behind the seat. Place a small shaving mirror on the floor under the latch and use a screwdriver to push the latch up. After the seat released you find out that there were 2 latches on the 60 side, and the one over by the 40 side must have been caught on something. You should now open and close the seat a couple of times.

Feb 16, 2016 | Chevrolet Chevy Cars & Trucks

1 Answer

2001 Chevy Silverado 1500 How does rear seat


There is no adjustment that I know of. I had a 2000 Silverado and the only adjustment was the ability to raise the bottom of the seat up to place large items in the back.

Oct 15, 2014 | 2001 Chevrolet Silverado

1 Answer

Manual Seat adjustment on Drivers side broke 2001 Chev Silverado 2500


Did you just need to tell someone or was there a question I failed to see here?
You can go to most any junk yard and pick your own replacement.
Some places don't let you go get your own part, so take a pic of the damaged part in your rig and show them what you are looking for.

It should be the same part from most Chevy/GMC trucks from 1990-2001

Feb 02, 2013 | 2001 Chevrolet Silverado 2500

1 Answer

My heated seats in my 2003 chevy silverado 2500 hd turn on to high automatically when i start the truck. how do i fix this or atleast unhook them untill winter?


well you can't just pull the plug or unhook the seat from below,, the motor for adjusting the seat seems to be on the same circuit, unless your the only one who drives the vehicle, then you could yank the circuit breaker for the seats , what it sounds like to me with the heat issue is that you have a shorted element in the seat itself, and they are pretty lame as heaters go, Chevy sells a replacement which consists of a piece of tape with the element inside of it, and you have to remove the covers and weave this replacement through the seat,, Ive only done one, but you could see all the burn spots on it,

Jul 08, 2011 | 2003 Chevrolet Silverado 2500HD

1 Answer

The power seat on my 2001 chevy blazer doesn't work


you can't realistically buy a new one so your choices are:

find a similar used non power seat in a junkyard, unbolt yours and bolt it in. then buy seat covers which more or less match the rest of your interior

find a similar used working power seat in a junkyard, unbolt yours and bolt it in. then buy seat covers which more or less match the rest of your interior.

find a used similar working power seat in a junkyard, unbolt yours and swap the internal working electrical parts from the one in the junkyard, then bolt yours back in.

Feb 24, 2011 | 2001 Chevrolet Blazer

1 Answer

How do I remove the head rest on the front seats of my 2002 Chevy Silverado crew-cab to allow me to install customized seat covers?


see a plastic cap type thing attached to the seat where the rod of the headrest goes in feel this cap and you wil find a puch button press it and pul the head rest

Feb 07, 2011 | Chevrolet Silverado 2500HD Cars & Trucks

1 Answer

We need to remove the drives side head rest to install a seat cover, but we cannot figure out how to remove the head rest. How do you remove the driver's side head rest?


Head Restraints Removal
  1. Unscrew front seat head rest guide rod retainers (610A18) .
  1. Pull up on front seat back head restraint (611A08) . Compress foam in area of front seat head rest guide rod sleeves (610A16) .
  1. Remove front seat back head restraint positioning springs. Pull front seat back head restraint up and out.
Installation
  1. Slide front seat head rest guide rod retainers onto front seat back head restraint posts.
  1. Compress foam in front seat head rest guide rod sleeve area. Install positioning springs on front seat head rest guide rod sleeves .
  1. Insert front seat back head restraint posts (notches on posts facing rearward) into front seat head rest guide rod sleeves and push down to engage positioning spring.
  1. NOTE: Front seat back head restraint must operate smoothly throughout its range of travel, must remain in any fixed position, and must not be freely removable from the seat back. If any of these conditions are not met, check for proper installation of positioning spring onto front seat head rest guide rod sleeve .

    Tighten front seat head rest guide rod retainers onto front seat head rest guide rod sleeves .
  1. Adjust front seat back head restraint by applying hand pressure, either up or down, to center area of front seat back head restraint .

9a4d433.gif

Aug 21, 2010 | 1998 Ford Taurus

1 Answer

How do I get the head rests off 2002 monte carlo--want to put on seat covers


push in the adjustment clips while pulling up on the head rests

Aug 02, 2010 | 2003 Chevrolet Monte Carlo

1 Answer

1994 BMW head rest


there should be a sliding button just where the pole of the headrest goes into the seat, just push this , and the headrest should come out

Jul 26, 2009 | 1994 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

499 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...