Question about 1984 Ford Mustang

1 Answer

I need a diagram of the starting system for a 1984 5.0L engine i am installing in a 1997 ford ranger. i am building it up from scratch and could use a diagram.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

First you are not allowed to install an older engine into a newer car, the engine must meet the newer car emmisons control. Unless you live in a state that does not have emmison controls. as for starting it is fairly simple on fords you have the wire for the stater are the same and you have to power the ingtion coil. However you will have to change the fuel pump system If it has a electric fuel pump you will have to have the setup for the engine. But the best place to get this information is www.alldatadiy.com. you will be able to get just the engine diagrams for both and the fuel system diagrams as well. it will also cost you some time reading but is much faster than using books. If you need anymore answers on doing this let me know and I can give you more detalied information in swapping the engine out. Just be sure you don't have to smog it. you will have computer issues and other things to deal with but it is not impossible to do. Some things you may run into is the low octane gas won't burn very well in the 84.

Posted on Nov 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 ford ranger vacuum hose diagram


1999 Ford Ranger Vacuum hose diagram
Pamela, Normally vacuum line routing can be found under the hood of truck, on Rad support or on the underside of hood. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Ford Ranger Engine Vacuum Hose Diagrams
Vacuum Lines The Ranger Station Forums
Repair Guides Vacuum Diagrams Vacuum Diagrams AutoZone com

Jun 12, 2016 | 1999 Ford Ranger SuperCab

1 Answer

1997 Ranchero Outback, 4.0i inline 6 engine. Where can I get color coded diagram?


diagram showing spark plug wires to Coil pack? - Ford Truck ...

www.ford-trucks.com > ... > Small Chassis Trucks > Aerostar
Apr 8, 2014 - now I cannot find a diagram for the Driver's Side wire positions at the Coil... (the Passenger side wires are 1-2-3, starting from the front of the engine, simple enough); The Coil pack ... But the Driver's Side wires are not in a Sequence of 4-5-6, instead ... 1997 Ford Aerostar 4.0L RWD (purchased May 2012) Camshaft Position Sensor (CMP) wiring pigtail replacement
May 8, 2012
Help! 1994 4.0L Ranger misfiring & hesitating under load?
Oct 31, 2011
1994 F150 starter wires
Jul 16, 2011
Coolant Loss - 4.0L OHV Lower Intake Gasket
Apr 21, 2004
More results from www.ford-trucks.com

Sep 30, 2015 | Ford Cars & Trucks

1 Answer

302 ranger swap help


some of the engine change over problems are tough to have everything the way i do it is write catagorys mounting,electrical,and fuel ect. and it helps to have the doaner car/truck around to get some of the hard to find pieces from or build it from scratch

Nov 18, 2013 | 1992 Ford Ranger

1 Answer

1988 ford ranger 2.9 fuel injection wireing order and color order


Jul 22, 2012 | Cars & Trucks

1 Answer

I need wiring schematic for starting on a 96 ford ranger 3.0


Thank you for the year,make and model with the engine size, this make it easier for me to help you with the correct info.

Wiring diagram for a 1996 ford ranger , splash with 3.0 engine.

Here is the starting system wiring diagram. Hope this is helpful good day.3_18_2012_3_06_28_pm.gif

Mar 18, 2012 | 1991 Ford Ranger Supercab

1 Answer

Need diagram for timing belt for 1997 ford ranger


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1997/make/ford/model/ranger/1997_ford_ranger_timing_belt_diagram_marks.htm

Oct 29, 2009 | 1997 Ford Ranger SuperCab

1 Answer

Ignition wiring


firingorder6a.gif firingorder6.gif 1991-1994 2.9L and 3.0L Engines Firing Order 1-4-2-5-3-6 1995 And Later 3.0L V-6 With DIS Ignition System Firing Order 1-4-2-5-3-6
4.0L Engines Firing Order: 1-4-2-5-3-6 DIS Ignition System

Nov 22, 2008 | 1995 Ford Ranger Supercab

Not finding what you are looking for?
Cars & Trucks Logo

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...