Question about 2006 Chevrolet HHR
When I turn on my A?C on my 2006 HHR it only worked on high speed. I was told to replace my blower motor resistor and I did but still have a noise coming from the blower motor. Do I need to replace this and how do I do it?
You need to replace the blower motor resistor assembly try this website www.autozone.com if they do you be able to checkout a price and get pictures and diagrams for the most part its on the passenager side behind the glove box i also would like to give you this information if you every have any hard to find GM-parts its Schram auto & truck parts 1-800-292-1032 and they website is www.schramauto.com and i hope i have been some help to you Michigan Man.
Posted on May 12, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: ac blower motor
The blower motor resistor is located at the top of the fresh air intake (hard plastic hose going into the "box") You most likely have, or have had, water in your passenger side floor board area as well. The resistor is in direct line with one of the water leak problems on the 2006. I would bet that the "noise" you hear is trash, or debris in your fan motor housing. (might even be water)
Open your hood and remove the black plastic moulding from your lower windshield (remove the wiper arms first) there you will find a clear plastic sheet of polyeurethane. It is either missing or open enough for "critters" to gain access to your fresh air intake.
Posted on Mar 10, 2010
SOURCE: blower speed
you need to replace the blower risistor. it should be located very close to the blower motor. it usually has 3 wires that are in a row and one wire a little to the left of it but located on the same oval fixture. go to the auto parts place and buy one . this way you will no exactly what it looks like so you do not have to spend a lot of time and money researching it.
Posted on Sep 21, 2008
Tips for a great answer:
Jun 11, 2017 | Pontiac Cars & Trucks
Dec 01, 2016 | 2006 Chevrolet HHR
Oct 11, 2014 | 2006 Chevrolet HHR LT
faulty blower motor resistor. The low and medium speed on blower motor is
controlled by resistor and its actual speed is high. So because resistor is not
working, blower motors actual speed which is high is working.
can be faulty blower motor or faulty blower motor resistor. Get the blower
motor inspected. If it's faulty it has to be replaced.
blower motor testing and replacing, check the link below: ----
These will help.
Dec 07, 2012 | 2006 Kia Sportage
Jul 18, 2011 | 2006 Isuzu i-280
Oct 04, 2009 | 2001 Chrysler Town & Country
Sep 09, 2009 | 2006 Nissan Titan
Sep 21, 2008 | 2006 Chevrolet HHR
571 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: