Question about 2007 Honda CR-V

1 Answer

2004 honda crv brakes are locking up, front right hydraulic line collapsed, had both front lines replaced, new front rotors the front right was scorched, new pads, new master cylinder was replaced, when the brakes feel that they are locking up. I stop the car and with my foot i pull up on the break pedal.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 192 Answers

Check to see if the rubber bushing is on the master cylinder pushrod where it bolts up to the booster..if its missing and or doubles , it may cause u to lock ur brakes up..i had this problem where the tech didnt put one and or didnt remove one while installing the new master cylinders...there should only be one. most factory and aftermarket mast cyl come with one however techs sometimes for get to check the booster for the old one some assume its still there cuz they always almost get stuck in there..so they install the new master cyl.without one or with one and either they have none..or both...it only needs one...

Posted on May 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front rotor brakes on 1978 panel truck .they lock up temporarily ,need replacing or cleaning ?


if they are locking up this sounds more like a hydraulic problem like the calipers pistons are sticking/seizing and need replacing. also if the caliper slide surfaces are worn/dirty can cause calipers to stick as well as the hydraulic brake hoses sometimes separate internally which can also cause the brakes to stick. the bottom line is have the front brakes checked out for condition and operation.

Sep 23, 2014 | Cars & Trucks

3 Answers

2004 Dodge the longer you drive the tighter and hotter the brakes get.


all dodge caravans from 2002 through 2011 have known problems with sticking calipers. if you google caravan brake problems you will see all the complaints. there are TBI's and recalls on them. I have a 2005 dodge caravan in my garage with all 4 calipers locked up. It is a good idea to replace the brake pads with the best ones and new rotors to

Dec 13, 2012 | 2004 Dodge Caravan

1 Answer

2005 GMC Envoy, no brake fluid is getting to the right front caliper. disconnected the brake line where the rubber line and the metal line are attached, pumped brakes and get absolutely no fluid through...


You may have a defective line on the right front brake. GM had a batch of bad lines installed on several year models. I had one collapse on mine with the caliper closed and burned my caliper, rotor and pads. Try to disconnect the metal line further back at the equalizer and see if you get fluid there. If you do replace line.

Mar 11, 2011 | 2005 GMC Envoy

1 Answer

Right brake locks up when applied i have new brake shoes on brake shoes are on the right way


The longer brake shoe goes ot the back side of the vehicle. If you replaced the front brakes did you replace the rubber brake line going to the caliper? Some times they collapse inside creating a one way valve that will not allow the hydraulic pressure to release. You mention brake shoes - don't know if you mean pads as on the front of most vehicles. (some vehicles have disc brakes all around) You don't say if front or back brakes are the culprit. Hope this helps. Let me know. Thanks.

Dec 27, 2010 | 1997 Dodge Ram 1500 Club Cab

3 Answers

Resurfacing front rotors


This tutorial will help you : http://www.ehow.com/how_4719219_off-brake-rotors.html
Some after market brake pads are better than the company fitted ones, but they will be more costly.

Jun 01, 2010 | 2004 Honda Accord

1 Answer

1990 Honda accord brake problems


Short of jacking up the wheel and putting a new car underneath, you've just about covered all the possibilities. But I wonder, perhaps in your attempts to solve this, if you have inadvertantly introduced another fault? As you know, the brake master cylinder on a disc braked vehicle has no static valve. If there were to be a static valve in the master cylinder, the brakes would lock on after a few pumps. But this would affect both front wheels. There could also be a collapsed section in one of the flexible hoses which would let fluid through for bleeding but not allow the fluid to return. this would hold the brake on too. When you had the cliper off, did the rotor trun freely?

Apr 18, 2010 | 1990 Honda Accord

1 Answer

On 93 honda accord the brakes lock down as soon as it gets warm. The rims are hot and you can smell the brakes. The gas also drains like crazy when its locked down, and the motor won't get passed 30 mph....


  • CHECK THE RUBBER LINES IN THE FRONT AND BACK OF THE CAR ON EACH WHEEL. THEY GO TO THE CALIPERS ON THE FRONT/REAR BRAKES..IF THEY ARE TOO BAD THEY CAUSE LOCK UP ON THE BRAKES AS THAY COLLAPSE AND WONT LET THE PRESSURE DRAIN TO RELEASE BRAKES (LINE LOCK) ;) BAD CRACKS.SPLITS OR WEAR CAN CAUSE THIS.
  • OTHERWISE YOU MAY HAVE A STUCK CALIPER WHICH SHOULD BE REPLACED, OR PARKING BRAKE IS STUCK.

Mar 17, 2010 | 1993 Honda Accord

1 Answer

2004 Honda CRV - Front Brakes running hot!!!


either caliper seized ? also when you installed the rotors did you have them machined ?

Oct 19, 2009 | 2000 Honda CR-V

6 Answers

Pull to the left, Brakes


Sounds like it was pulling before the brake job...if so the only thing you didn't replace was the rotors, I assume you turned them? and did you see hard spots on the rotor? discolored area that didn't cut the same......switch the rotors left to right and see if the problem moves or just replace them if they've been cut twice.

Nov 30, 2008 | 1999 Dodge Ram 2500 4WD

Not finding what you are looking for?
2007 Honda CR-V Logo

400 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...