Question about 2004 Ford F250

Open Question

Got code p2287? f250 built in 04/2004

Got code p2287? read somewhere its a bad connection in the turbo? if so, it is top or bottom?

Posted by on

  • Greg Margossian
    Greg Margossian May 11, 2010

    Have checked all 3 motors available for your F-250, P2287 is not listed in the database. there is a P2286 and a P2288. Could you verify the code and post back please?

    btw both P2286 and P2288 refer to fuel injector malfunction



5 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 474 Answers

SOURCE: is there a good replacement turbo for a 04 f250

try banks or ATS

Posted on Nov 14, 2009

  • 387 Answers

SOURCE: 2008 Ford F250 6.4 turbo diesel, have 3 DTC codes

P0087- low pressure fuel system. Fuel pressur valve stock open, Fuel volume control valve stuck close, Leaking fuel injector,P0088- fuel pressure contorl valve stuck close, Fuel rail pressure sensor P2291-all @ at the above, means to say poor fuel quality

Posted on Jun 21, 2010

  • 1 Answer

SOURCE: 2008 Ford F250 6.4 turbo diesel, have 3 DTC codes


Posted on Aug 29, 2010

  • 1 Answer

SOURCE: 2008 Ford F250 6.4 turbo diesel, have 3 DTC codes

where do you check fuel pressure on a 2008 F-250 6.4

Posted on Jul 22, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Ford f250 p2286 what is it and were is it 6.0

Injector control pressure sensor circuit high. Not sure where it is

Apr 10, 2015 | Ford Cars & Trucks

2 Answers

How do I bleed a external clutch slave cylinder with no bleed screw on a 95 ford f250 turbo diesel

Need to remember that air rises. When replacing slave cylinder first hook everything up and bleed using the nut on the connecting line at the slave, then slowly depress and release pedal making sure to keep plenty of fluid in the reservoir, then after sitting a bit, tap on slave cylinder, line from bottom all the way up to the master, then loosen the nut connecting the line to the master and allow any air there to escape. Repeat whole process if needed.

Jan 05, 2015 | Ford Cars & Trucks

1 Answer

Ford wont start

Type: Ford OBD P2287

I don't have experience with deisels

I do see that question in the forums on the internet

I have a 2004 ford factory manual for all motors that year
but only for gas engines

Jul 16, 2014 | 2004 Ford F250

1 Answer

On my 08 f250 6.4 liter diesel my psi is increased in my turbo my mileage has decreasedbut I still seem to have plenty of power what would cause this egr?????

yes EGR valve is a good place to start , i'd get the OBD codes read as should list the sensor/switch at fault, keep me posted if you wish

Jun 13, 2014 | Cars & Trucks

1 Answer

Loose electrial power when ignition is turned on

check battery cables make sure they are clean no corrosion and tight also make sure they are fuuly charged if the caps on top are removeable check water level if low refill with bottled or distilled water if any of the holes smell like rotten eggs your battery may be bad most likely dead battery or bad connection somewhere

Mar 25, 2012 | 2002 Ford F250 Super Duty SuperCab

3 Answers

6.0 f250 2005 turns but not start

If it is a standard clutch saftey may be bad if automatic nuetral saftey,
Try auto in nuetral and wiggle shifter while turning key

Apr 28, 2010 | 2005 Ford F 250 Super Duty

3 Answers

What does the code P1247 mean? For a Ford f250 2002

The trouble code definition I am finding for the Ford OBD-II System is:

P1247--Turbo Boost Pressure

Oct 07, 2009 | 2002 Ford F250 Super Duty SuperCab

1 Answer


I believe it is a injector circuit malfunction on the left cylinder ban. Might check all your connections and make sure there are no rubbed wires or bad connections to the left cylinder injectors.

Sep 08, 2009 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

Ford f250 superduty turbo diesel 7.3L Will not crank

Charge the batteries. take a Reading to make sure that you are getting almost 14v to both batteries. If it is not charging then take the alternator back off and have them check it. you might have bought a bad one. There is a way to test the glow plus with out taking them out. ( Take a piece of wire long enough to reach all the glow plugs from the battery. unplug the glow plug wire.If you touch the end of the glow plug with the hot wire it should make a little spark. if no spark then the glow plug is bad. do this to each one, but one at a time)

Feb 25, 2009 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

Check engine light. 91 ford F250 5.8

Yes you can use a piece of wire on the Diagnostic Link Connector and the Self Test Input connector.
The DLC may or maynot be labeled, but it is the top right position you connect to the STI to get the codes. Can be read with the Check Engine Light. I would suggest getting a service manual from a parts store to help with this diagnostic, it has the codes list.

Feb 21, 2009 | 1991 Ford F250

Not finding what you are looking for?
2004 Ford F250 Logo

Related Topics:

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides