Question about 2005 Hyundai Elantra

1 Answer

How to adjust hand break hyundai elantra 2000 model

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 69 Answers

1. Remove the console upper cover.
2. Remove the crash center facia panel.
3. Remove Console Assembly.
4. Adjust the parking brake lever stroke.

You may not have to remove all of these pieces, just enough that you can access the adjusting nuts. Make sure both cables have tension, they are famous for breaking, and making the other side too loose.

Posted on May 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have no reversa 1997 hyundai elantra


chek tranny linkage for adjustment and/or slipping of the adjustment collar...

Nov 27, 2013 | 2000 Hyundai Elantra

1 Answer

Where is the map sensor located on a 2000 hyundai elantra


The MAP sensor on a 2000 Hyundai Elantra will be located directly on top of the intake manifold, 3-4 inches to the left of the throttle body (facing the engine), and attached by two 10mm bolts. However, some 2000 models may not have a MAP sensor, since it was added midway through the production year to prep for the updated 2001 elantra.

May 22, 2012 | 2000 Hyundai Elantra

1 Answer

Where do I find the starter on a 2000 or 2001 hyundai elantra?


On the 2.0 lit 4 cylinder engine, the starter is located on the right hand side of the engine below the intake manifold. If you follow (trace) the + electrical cable from the positive (+) post of the battery, it will take you right to it.

Feb 07, 2011 | 2000 Hyundai Elantra

1 Answer

How to change rear brake pads on hyundai elantra


you must squeeze the calipar PISTON back i use a G clamp to compress them!

Apr 14, 2010 | 2000 Hyundai Elantra

1 Answer

2000 elantra shuts off


When car stalls check for spark, if no spark check crank sensor. If there is a crack in the sensor when heated crack opens and car will stall

Aug 17, 2009 | 2000 Hyundai Elantra

1 Answer

How to adjust hand break hyundai elantra 2000 model


all cars have self adjusters these adjust them selves, but they do not always work, one trick is too hold your finger on the button and back up slow while pulling up and down on the handle, do it quick, on and off repeatedly like 50 times,but keep in mind you may have strecthed cables too which may need adjusting as well

May 11, 2009 | 2000 Hyundai Elantra

2 Answers

Clutch Sometimes Slipping in 4th and 5th gears!


Hi Jackiaria

Unfortunately you have a hydraulic clutch, which is self adjusting on your car.

The problem you are experiencing is the excessive wear to your clutch, or oil contamination on the clutch plate.

Both these problems can only be fully diagnosed once the gearbox is removed and the clutch is inspected.
There is also a possibility of excessive wear, or scoring, on the flywheel surface, the longer you drive the vehicle with a slipping clutch, possibly requiring the flywheel to be skimmed.

Shop around for a best price, and a trustworthy garage !

Good Luck !

A FixYa rating would be Nice....Thanks.....John.

Feb 17, 2009 | 2000 Hyundai Elantra

2 Answers

2000 Hyundai Elantra Transmission problem


I don't know if I can help but as an owner of a Hyundai Elantra 2000 GLS with 205,000 miles and the original clutch and transmission I'll try and help!

I always start with the lowest cost solution first and avoid mechanics as much as possible!

Have you checked the trans fluid?
It should be changed every 30,000 miles!
Sometimes a Lucas Trans Fluid will cure - fix slippage!

Have you checked for a clutch adjustmet!
An adjustment can cure - fix slippage!

Are you a clutch rider with your foot always on the clutch?
If so you may have worn out the clutch!

How many miles to you have on your Hyundai Elantra 2000?

Jan 12, 2009 | 2000 Hyundai Elantra

1 Answer

Handbrake adjustment


well it's kind of a lazy way of doing it but you can just go in reverse and throw the hand brake a few times and it will self adjust

Aug 20, 2008 | Hyundai Motor 2002 Elantra

Not finding what you are looking for?
2005 Hyundai Elantra Logo

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...