Question about 2000 Ford Explorer

1 Answer

Can anyone tell me what # fuse it is for the brake lights? I changed the bulbs but they keep blowing.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,369 Answers

Fuse 13, 20 amp yellow.

  • The Stoplamps Are Inoperative
  • Fuse(s).
  • Brake pedal position (BPP) switch.
  • Circuitry.
  • Lamp outage module (if equipped).
  • GO to Pinpoint Test J .
  • One or More Stoplamps Are Inoperative
  • Stoplamp bulb.
  • Circuitry.
  • GO to Pinpoint Test K .
  • The Stoplamps Are On Continuously
  • BPP switch.
  • REPLACE the brake pedal position (BPP) switch.


please give a good rating. thanks

Posted on May 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My brake light fuse keeps blowing how to fix?


pull the rear bulbs out and try again, does it have a third brake light? does it work?

Dec 10, 2015 | 2006 Ford Territory 4.0

1 Answer

Why does my turn signal/ hazard light fuse keep blowing out


you have a short in one of the light sockets or a worn wire from the wiring harness. could be the flasher assembly. are the turn signals different bulbs from the brake lights? Does using the brakes blow the fuse? (Rear lights or brake light switch on brake pedal). left or right turn signal blowing the fuse will tell which side has the short. 4 ways only, replace the relay.

May 21, 2015 | 2004 Jeep Grand Cherokee

2 Answers

Brake light fuse and fog light fuse blowing


-- First - double check that you have the right sized fuse. If you're using a 15 instead of a 30 - it'll blow for sure.
-- Maybe the light is too bright for your circuit. Try a dimmer bulb.
-- Next, have you had anything installed in your car BEFORE this started happening??? More specifically, on the same circuit as the one that is blowing??? If yes, you'll need to make sure that a no wire is touching any metal part of the car, or that no screw pierced a wire and now makes contact with metal or water.mthat can easily cause a short and blowbthe fuse.
Take a few moments to inspect the condition of the wires, make sure everything looks good and use electrical tape to repair if need be.

Nov 18, 2014 | 2003 Land Rover Freelander

1 Answer

Brake light fuses keep blowing


On some models the light switch it defective increasing the volts in the tail and brake circuit.

Dec 02, 2013 | Mitsubishi Galant Cars & Trucks

1 Answer

Why does my brake fuses keep blowing on my kia sportage 2001


you have faulty brake light switch or one of brake light bulb sockets or wiring have a short.

Jan 03, 2013 | 1996 Kia Sportage

1 Answer

Brake light fuse keeps blowing in my 1997 Suburban only when towing trailers.


If the fuse blows on different trailers then it's all down to the vehicle. You either have incorrect wiring on the vehicle, a short OR the fuse is not of a high enough value to cope with the additional brake lights? You could try removing all the trailer bulbs EXCEPT the brake lights - e.g. if it's trying to power up the indicators too? That would stop the fuse blowing...... OR remove the brake bulbs from the vehicle & see if it operates the trailer without blowing...... Check the total wattage of ALL the brake lamps & see if the fuse is actually of a high enough rating? Be aware though that increasing the value of the fuse could cause damage elsewhere! As a rough guide a 25 watt bulb will pull around 2 amps at 12 volts - so 4 bulbs may pull up to 8 amps & clearly blow a 5 amp fuse! If in doubt take it to an auto electrician...... The wiring needs to be correctly protected!

Apr 02, 2017 | Cars & Trucks

1 Answer

How do I keep fuses for hazards and brake light from blowing


They use the same bulbs in the back.
Check the light sockets and wiring for shorts to ground.

Jun 30, 2012 | Ford E150 Cars & Trucks

1 Answer

I have a1993 Fird Taurus wagon. The brake lights


Check all fuses with a test light with key on.
This is the best way to do it on Fords.
Change all blown fuses.
Are the brake light BULBS OK?
This is the more common cause of.....no brake lights.
....and don't forget the brake light switch if all this fails.

Aug 11, 2009 | 1993 Ford Taurus

2 Answers

2004 Landrover Freelander stop/reverse light fuse keeps blowing


I had a persistent problem of hill light warning and TCS warning lights coming on for no apparent reason. There is a wire connection between the stop light switch and the control unit to let the system know when brakes are being applied. Changing the stop light switch cured it. The replaced switch was certainly sticking and the new one was of a different design. Replaced it myself as switch comes with a wiring loom. Need to get on your back under the steering wheel! Not very expensive. My car 2001 TD4

Les

Jun 19, 2009 | 2004 Land Rover FreeLander

1 Answer

Ford focus brake light failure !!!


1 - are you SURE theyre the right bulbs! - if theyre too bright they can blow the fuse, if theyre the wrong type of bulb they will blow the fuse.. best get the bulbs direct from ford, they are always in stock, so are the proper fuses.
2 - theres a center brakelight isnt there? check this bulb too for proper wattage and size/shape
Other than that maybe the wiring in the boot is damaged and shorting?? -----
Leave feedback good or bad.

Jun 15, 2009 | 2000 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...