Question about 1991 Plymouth Sundance

1 Answer

I have a 1991 sundance and the fronk end is shaking at a speed about 35 then gos away we changed tires checked air pressure and the problen is still thier we mover the motor over to the drivers side about 3/4 of an inch dont know what more to do thanks frank

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Have an alignment check done if it's been more than a year. Most reputable places offer free inspection. If no replacement parts are needed, then a normal alignment is in the $45 to $90 range. Have you hit a curb or object recently? That could throw it out of whack.

Posted on Jul 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2005 jeep cherokee front end pulsating


Please have this checked out as soon as possible. Either you, a Mechanic, or an alignment shop, need to check out the front-end and all four points. Something has changed, broke, or is loose and worn out. Check: Ball-joints, wheel bearings, tie-rods, rims, lug-nuts, tires, tire balance, tire inflation, tire tread wear, alignment, U-joints, shocks, and suspension. Let me know if I can be anymore help, good luck.

Mar 07, 2014 | 2005 Jeep Grand Cherokee

1 Answer

How do i change serpentine belt on my 91 plymouth sundance


you should have a belt tensioner that you can put a box wrench on and pull back on to relieave the tension on the belt . Pull the belt off the closest pulley and enjoy , dont forget the route it gos back on though !!! take a picture if need be!!!

Dec 16, 2010 | 1991 Plymouth Sundance

1 Answer

Front end shakes Usually at about 35-40 mph then goes away


If you can drive through the shaking to a higher speed most likely there is a problem with your tires or rims.. possibly out of balance or a belt is separated in one of the tires.. have your tires checked for balance and while they are being checked have the tire shop look at your rims to make sure they are no bent...

Jan 14, 2010 | 2000 Ford Expedition

1 Answer

Tire pressure recommendations have worn off the door jamb and I can't find online manual to get the recommended tire pressures for 1991 Plymouth Sundance


tire pressure is not a relly big deal usually a cars pressure is at 32psi even 35 would be good depends if u got a car fool ant traveling then 40psi but around town 32 is perfect for ur vehicle if u whish to proceed in ur search for manufacture recomandation thats ok but 32 to 35 is normal

Sep 01, 2009 | 1991 Plymouth Sundance

5 Answers

Death wobbles


check the ball joints for looseness this will cause an excessive shake at higher speeds

May 23, 2009 | 2005 Ford F 250 Super Duty

1 Answer

92 Dodge Grand Caravan - shakes!!!!!!


It sounds like you need a tune change at least the wires and plugs it also could be a worn or broke motor or tranny mount.

Apr 07, 2009 | 2004 Pontiac Montana

2 Answers

My car starts to shake after about 35-45 mph


rack and pinion is the steering wheel joint, so if the steering wheel shakes or handling has decreased, then i would say it is the rp. , also check the wear on the tires for uneven wear, it could be alignment, does the steering pull to one side? it could be motor mounts just find the bolts and check em wiht a torque wrench, also inspect mounting bushings as well. to check trans. give it alot of gas to get past 35-45 mph and the shaking should go away at higher speeds, if it doesnt then its the trans missing "third".

Mar 11, 2009 | 1996 Dodge Intrepid

1 Answer

1991 Honda Civic Hatch Dx - Tire Pressure


about the same 30 to 35 would be perfect thank for posting pierre

Feb 01, 2009 | 1991 Honda Civic

Not finding what you are looking for?
1991 Plymouth Sundance Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...