At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
most all newer vechicle when turn off ignition.light will turn off automatically.only time use manual headlight switch when malfunction in the automatic lights not turning on manual light design just get you home.
Push the headlights switch in. The switch doubles as the cabin light switch and it easy to activate the cabin light when turning the headlights on or off
COULD BE FAULTY DRL HEAD LIGHT RELAYS OR FAULTY DIMMER SWITCH.SINCE HEADLIGHTS TURN ON AUTOMATIC.TRY USING MANUAL HEAD LIGHT SWITCH ON TURN SIGNAL SWITCH LEVER SEE IF HEADLIGHTS STAY ON IF LIGHTS STAYS ON YOU HAVE FAULTY DRL HEADLIGHT RELAY.IF LIGHTS STILL FLICKER OFF.YOU HAVE BAD DIMMER SWITCH.
headlight switch may need replaced if you have auto shut off make sure it is adjusted correctly. If the switch checks out check the headlight timer for the remote shut off for the lights
U got a BURNED LiGHT SWiTCH, usually they have plastic inside the contactor that selects the switch from dipping/high and turns on ur LiGHTS!
Replace the whole LIGHT SWITCH assembly!
Hope that might help u out!
I own the same year make and model. The headlights are supposed to stay on for a few minutes if you shut them off after shutting off the engine. This is a safety feature. These are the headlights only. If the lights, side markers and taillights stay on, then the issue is most likely the switch. You will have to pull the switch and disconnect the wiring harness to confirm this. If the lights go out, then the switch is bad.
However, if the lights don't go out, or the headlights never shut off until they drain the battery, you may want to take the car in to get diagnosed. There could be an issue with the body control module or wiring. Most likely, it is the switch as Chrysler uses the cheapest parts for their switches, but I would check it first and not swap parts. All you have to do to check the switch is pull the bezel it sit in out of the dash. The switch is held in with two screws.
ya know it kinda sounds like the headlight switch that switches from high beam to low beam has a bad contact. You don't have one of those 4-beam modules that turn on all 4 lights on high beam do you? that thing screwed my whole headlight system up, I ended up throwing it in the trash.
I have the chiltons and haynes manual, I'm sure between the two we'll find a good diagram. I gotta get my youngin to open house at school, but I'll pull the books out and send you the wiring diagram.
×