Question about 1992 Ford Mustang

1 Answer

GOT 92 MUSTANG WITH 89 WIRING HARNESS. JUST PUT MOTOR IN IT, IT WILL TURN OVER BUT WONT FIRE. HAS POWER AT INJECTORS TILL YOU TURN ING. OVER THEN LOSES POWER TO THEM.FUEL PUMP RELAY SHUTS OFF WHEN YOU TURN OVER TOO.

Posted by on

  • 2 more comments 
  • Anonymous May 11, 2009

    NOT SURE ON THE YEAR OF COMPUTER BUT THE CAR WAS RUNNING 4 MONTHS AGO WITH THIS SET UP. GUY I BOUGHT FROM BLOW MOTOR UP. IF YOU RUN A WIRE TO COIL TO BATTERY HOT SIDE IT STILL DOSNT FIRE TILL YOU QUIT TURNING OVER THEN IT WILL SPARK ONCE.

  • Anonymous May 14, 2009

    replaced ignition module, ignition switch,distrub. module. checked today and it has no power on the red wires coming from computer. the fuel pump will come on when turning the switch in the on position but shuts off when you try to start it.ideas?

  • mike loshbough
    mike loshbough May 11, 2010

    try replacing the ignition module

  • mike loshbough
    mike loshbough May 11, 2010

    what year computer ?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Sounds like something is wired wrong.Post this on www.foxbodyconnection.com I bet the members will have an answer for you.

Tony

Posted on Mar 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Missed fires on spark plugs 135


could be coil problem or wiring harness for those injectors

Jun 01, 2017 | Cars & Trucks

1 Answer

Engin wont start after putting in car it won't fire


Sounds to me like there is a problem with the PCM or the power supply to the injectors. I think it's fairly safe to assume that all four injectors didn't go bad at the same time.
You can hook up a noid light to the injector harness and see if it flashes. If it doesn't, then you have a problem with the injector wiring.
Check for power at the black/red wire of each injector. If you don't have power, then it is most likely a bad Auto Shut Down (ASD) relay.
If you do have power, then you probably have a bad PCM.

Jun 26, 2014 | 1997 Eagle Talon

1 Answer

89 pickup 22re. no fire on no. 1 cylinder


It could be a fault in the wiring for #1 injector, or a defective spark plug in #1.

All four injectors have a hot wire to them with key on, the same black with red stripe wire is spliced to all four. Check if #1 has this hot wire with key on. The injector ground wire for #1 and #3 is a white wire with red stripe. These two ground wires splice together before the ground wire enters the computer. So the computer pulses #1 and #3 injectors simultaneously. (Injectors 2 and 4 have a similar set up, with a white wire being their ground.) If you have a hot wire to #1 injector, but no pulse on it, but #3 injector is pulsing (putting fuel into the cylinder), then the ground wire for #1 may be broke before it connects with the #3 injector ground. The wires and the splice are probably buried inside the engine wiring harness, so one could check for continuity on the ground side for 1 and 3. With key off, use an ohmmeter and check resistance between the grounds for #1 injector connector and #3-check on the harness side of the injector connectors-it should show low resistance-low ohms value. If very high resistance is shown, trace the ground wire from #1 injector.

Apr 25, 2014 | Toyota Pickup Cars & Trucks

1 Answer

Power seat wont work 1996 mustang convertible


http://www.moddedmustangs.com/forums/94-95/64750-how-fix-my-power-seat.html
please find this site useful sounds to me that wire use to belong to your power seat motor but they recalled the motors because they had a tenancy to catch fire and burn the seat

Sep 27, 2012 | 1996 Ford Mustang

1 Answer

92 dakota no ing. orfuelpump or injectors


Have you checked the auto shutdown relay ?
Did you check for trouble codes ?

Jun 25, 2012 | 1992 Dodge Dakota

1 Answer

I have a 89 ford mustang and the person who owned it before me did not tell me they replaced the motor with a 92 ford e-250 or e-350 van motor. I have wires and hoses everywhere that are just laying inside...


firts you are talking two diferent engines, a 5.0 from a mustang has the same firing order than a 5.8 on other hand a regular 5.0 non HO from a truck or car has a diferent firing order and they arent roller. so look up your options.

Apr 29, 2011 | Ford Mustang Cars & Trucks

1 Answer

Got a good one. my 91 coupe original 5.0 car. motor is new. it ran for two days then went to fire on third day and now will crank and crank but wont fire. got 42psi on fuel pressure 148psi compression on...


the fuel injectors are fired by computer producing a ground signal to them. so its unlikely they are fireing at once.possible power supplie problem but that would cause no injector pulse.beings how the engine was just replaced i would go over every wire and all grounds to make sure they are not shorted or pinched under a manifold or something.if you pull the plugs and they are black then you are getting to much gas. in wich case i would check to see if the fuel pressure regulator diaphram may be ruptured.if you take off the vacuum hose to it and look for moisture from gasoline. or leave hose off and try to start it if gas squirts out that regulator is bad and needs replacement

Apr 15, 2010 | 1991 Ford Mustang

1 Answer

I have a 84 potiac fiero 4 cyl and the multi port injector wont spray when trying to start. I tested it with two wires to the batery and it works, but the wires coming out of the harness wont turn the...


Be careful putting 12 volts to the injector harness,it will burn the e c m out.The module in the distributor,and the pickup coil work together to pulse the injector and energize the coil.The ignition module is most likely the problem,but the pickup coil in the distributor,would be my second choice in the two.See if it has spark,or spray a little bit of starting fluid in the intake,not much,if it fires,and tries to run,replace the module,and the pickup coil.If it has no spark,the module replacement will be all that is needed.

Nov 12, 2009 | 1984 Pontiac Fiero

1 Answer

# 1 injector not firing


Well you need to check the harness to see if it is getting power. You may need to take the plentum off and then unplug the harness and then reinstall the plentum but make sure that you leave the harness out so you have access to it.

Then you can make a test light or purchase one. Plug the test light into the harness and start the car. This light should flicker, if not you didn't repair the wire properly. Doesn't sound like a fuse being that none of the injectors would work if a fuse blew.

It could also be that the PCM grounded out when the mouse chewed the wire and needs to be replaced.

Don't worry about checking the ASD Relay because that would cut off all power to the injectors and coils.

Apr 22, 2009 | 1999 Dodge Intrepid

1 Answer

No power to injectors


are they plugged in?
check the fuse

Dec 13, 2008 | 1992 Chevrolet S-10

Not finding what you are looking for?
1992 Ford Mustang Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...