Question about 2006 Renault 181

1 Answer

RENAULT TRAFFIC 04

STARTS DRIVES MINT THEN INTER MINTENT FAULT SOUNDS LIKE KNOCKING IN ENGINE LOW POWER CUTS OUT AND ONLY STOP LIGHT ON THEN TURN OF ATHER A FEW REPEAT STARTS FINE AND DRIVES MAYBE FOR A HOUR OR EVEN ADAY , WHEN STARTING FROM COLD LOADS OF WHITE SMOKE COMES OUT

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi had same problem on a 04 reanult trafic 100dci changed the EGR valve but no success then changed the fuel filter and new seals and its been fine ever since hope this helps

Posted on Jul 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Extremely rough idle and car cuts off


run the fault codes first
indicates either injectors/low fuel pressure or crank/cam position sensor problem

Oct 09, 2017 | Cars & Trucks

2 Answers

I drive a Renault Clio 3 2006 Model. After having the main and bigend bearings replace I have the following problem. The car starts and run okay for a while then when I 'm driving it starts misf


Misfires are always worse when the components get hot, why? the resistance goes down as the temperature rises. You need to run a fault code test to see what cylinder is misfiring, it will set a code and you should have a check engine light on.

Mar 24, 2017 | Renault Clio Cars & Trucks

1 Answer

Car starts but than cuts out and the red light stop comes on. also the coll lights comes on and it will not run for more than two mins


sounds like the engine may be being starved of fuel as not enough is getting to the engine on tick over most likely cause is a fuel pump problem

May 10, 2010 | 2003 Renault 181

1 Answer

Ive got a renault trafic 1,9 diesel and the engine cuts out when you exceed 2600 revs and the manament light flases on ive replaced the cam sensor and the fuel pressure switch it shows no fault codes also...


Renault traffic when stationary will normally not exceed from idling to reving 3000 unless in motion on the road. I presume that this is a F9Q *** DCI engine This is not an easy problem to solve and will probably need some special tools to make the proper assumption, like a certain tool that can measure the return from the diesel injectors anyhow I'd probably place my money that most likely that the diesel injectors have a problem and I believe they're not cheap I hope this information has helped you in some way.

Mar 28, 2010 | 2003 Renault 181

1 Answer

Injectio fault message


the lead injector is reading a fault ,but this is a renault?? and these meganes use encrypted software which only a renault dealer have access too via the internet with fingerprint recognition to connect so either sell car quick and buy a ford mondeo or have your wallet raped by the main dealer .ANY ATTEMPT TO TOUCH ANYTHING YOURSELF WILL ACTIVATE THE IMMOBILLISOR

Jul 25, 2009 | 2005 Renault 181

2 Answers

Knocking noise Renault Megane 1998


this is a white box on the other side of the passangers dash board. lift up the bonnet and disconnect it. that will stop the noise but now your heaters will only get warm instead of hot. its some sort of flap to do with the heater matrix. realy anoying

Apr 28, 2009 | 2000 Renault 181

5 Answers

Renault traffic 03 1.9dci low power until turbo cuts in and wont rev past 3800rpm in any gear also occasionaly cuts out with engine management/glow light on no faults on diagnostics


my trafic did the same.no power pulling away until the turbo kicked in and it turned out to be the airflow meter.Hope this helps as it cured mine.Plus non of them rev past 3800 revs its normal.

Feb 28, 2009 | 2006 Renault 181

1 Answer

Engine cuts out when the electric cooling fan starts


Check all ground connections and clean them thoroughly. If I was a gambling man, I would lay down money on it being a bad ground. It likely is a combination of all the ground connections being poor.

Jan 25, 2009 | 2000 Renault 181

Not finding what you are looking for?
Cars & Trucks Logo

830 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

xxxxxx xxx

Level 3 Expert

4869 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...