Question about 1999 Jeep Grand Cherokee

1 Answer

1999 Jeep Cherokee (not Grand) driver door power control

The power controls are not working on the front driver's side door. Passenger side door lock control will lock all 4 doors, but none of the windows will roll down now from any of the controls. I've seen suggestions of wiring needing to be checked in the between the door and main frame of the body. How can I do this? When I take the panel off, that area is mostly encased in the metal of the door. First I need to know how to check the wiring. Second, any other suggestions on what might be causing all power switches to quit working, except the passenger side door lock? Thanks.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Jeep Master
  • 412 Answers

There is a rubber boot between door and body,peel it back from each end and will expose wiring..try pulling on each wire and you will more than likely find 1 or more broken wires..happens because driver's door is used the most..have seen this on these vehicles..wiring can be repaired

Posted on May 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 jeep grand cherokee limited 4.0, the keyless control just unlock all the doors with the front passenger door open


be more clear., please.
what works, and dont, using all ways to lock a car.
all doors. all methods.
inside or out side car. (fob and not fob ways)
only that matters

Nov 14, 2016 | 1999 Jeep Grand Cherokee Limited

1 Answer

I have a 2004 Jeep Grand Cherokee Laredo. All of a sudden my power windows, passenger side mirror, and sunroof all stopped working. Also, I can only lock my drivers side door with the power lock switch...


All of these functions are controlled by a central electronic module referred to as the BCM (body control module), you must have the dealer scan this module and run it through an active test to see what is wrong, it may be a defective BCM causing this, but that needs to be programmed and is not a plug and play part.

Jul 03, 2012 | 2004 Jeep Grand Cherokee

1 Answer

1998 Jeep Grand Cherokee Laredo TSI, Passenger side windows do not work from master switch on drivers door. Both driver side windows work from master switch on drivers side. Passenger side windows do work...


It has to be the switch or the wiring, right? So pull out the switch and probe the back with a volt meter to see if power is coming out of the switch. If yes, trace the wires to the doors.
0900c152800aa140-zzyiglue2iivran2oy1paayi-3-0.gif

Jun 30, 2017 | Jeep Grand Cherokee Cars & Trucks

1 Answer

1997 Jeep Grand Cherokee Laredo 4 x 2, windows and door locks work on driver side, but not passenger side.


sounds like an open power or ground circuit on passenger side,since the door lock and the window,lost its functioning.Both switches would have to be bad at the same time,which is not probable, to be the fault. Unless there is a saftey lock out switch on the drivers panel,controling the passenger side door lock and window.

Sep 02, 2010 | 1997 Jeep Grand Cherokee

1 Answer

Driver side door lock and window controls don't work, and the other window controls dont work, but the locks do work with remote and with button only on passenger and back seat, but no window controls work...


i would look at the wiring in the door shut on drivers side as wires tend to break in the rubber sleeve, if this is the case carry out repair and should solve your problem

Jun 01, 2010 | 1999 Jeep Grand Cherokee

2 Answers

I have a 2000 Jeep Grand Cherokee, the door lock, window controls and power mirrors dont work on the drivers side. The lock button works on the passenger side though, but nonw of the windows work. Can...


Sounds like the driver door module. First try disconnecting the battery for a few minutes and then try it. The door module controls all of those things you are describing.

Jan 29, 2009 | 2000 Jeep Grand Cherokee

4 Answers

2004 Jeep Grand Cherokee driver side power windows do not work


I had the same problem with now power to windows, mirrors and seat. The common soulution is the orange and or black wire in the boot have broken between the door and post.

Nov 25, 2008 | 2004 Jeep Grand Cherokee

3 Answers

1999 Jeep Grand cherokee


Check the wiring between the drivers door and the A pillar(the body of the car). Sometimes the harness breaks from opening and closing the door.

Nov 07, 2008 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
1999 Jeep Grand Cherokee Logo

353 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...