Question about 1996 Chevrolet Blazer

1 Answer

Sideview Mirror Replacement

1996 Chevy Blazer I need to replace the passenger sideview mirror. I'm able to remove the door panel, but I cannot get the nuts off the mirror screws. What size are they? I've tried a bunch of different sizes, but nothing seems to work. I also tried turning it manually with a needlenose pliers, but it seems as though they were tightened by the Incredible Hulk. Any help would be great. Thanks.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 607 Answers

Try either an open end wrench or 1/4" drive socket, possibly 10 mm or 12 mm ( metric ) . Forget using needlenose pliers. Hope this helps

Posted on May 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How do I replace the passenger sideview mirror


only the little triangle in the top corner behind the mirror needs to come off

Jan 09, 2010 | 1997 Buick Park Avenue

1 Answer

How do i change my sideview mirror on my 01 neon?


Easy! Basically you pop off the plastic cover on the inside of the door that leads to the sideview mirror. Remove the two or three nuts and pull the mirror out from the exterior of the door....installation is in reverse....that simple.

Jan 04, 2010 | 2001 Dodge Neon

1 Answer

How do I replace the mirror insert on the sideview


the mirror sits on a circular clip if u push against the middle it might click into place if not turn mirror all the way in towards the right so u have finger room stick hand behind mirror and pull forward will release keep hold if it if you have heated mirror disconnect the two wires

Sep 24, 2009 | 2002 Chevrolet Suburban

1 Answer

Replacement sideview mirror casing


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Mar 26, 2009 | 1998 Acura TL

1 Answer

Replace sideview mirror


inside the car u remove the plastic behind mirror assembly to acess bolts some cars require removing door panel 2 but most likey u can just remove the triangular plastic piece with panel on door

Mar 26, 2009 | 1995 Acura Integra Coupe

1 Answer

Sideview mirror assembly removal


  1. Remove the front door trim panel (23942) ; refer to Section 501-05 .
    • Peel back the watershield.
  1. Remove the rear view mirror mounting hole cover (17K709).
5d2b410.gif
  1. Disconnect the power mirror electrical connector.
0ea0125.gif
  1. Remove the outside rear view mirror (17682).
    1. Remove the screws.
    1. Remove the outside rear view mirror.
89dafc2.gif
please rate as fixya if this works for you.

Mar 03, 2009 | 1998 Ford Escort

1 Answer

Replacement of '02 grand marquis passenger power side-view mirror


  1. remove door panel
  2. remove mounting bolts
  3. if electric unplug conn.
  4. if has guide wires remove allen set screw from trim ring
  5. reverse procedure to install

Nov 15, 2008 | 2002 Mercury Grand Marquis

1 Answer

Sideview mirror


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Oct 23, 2008 | 1994 Buick Century

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

327 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...