Question about 1994 Pontiac Trans Sport

1 Answer

Engine change What´s the easyest way to bring out an 3800 engine from an pontiac transport 1993 .Is it to remove subframe or can i bring it out via the front of the car ?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 3,113 Answers

Drop cradle with engine, tranny, steering rack, front struts and all attached to it.

Posted on May 16, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is the easyest way to remove the power steering pump on a 95 pontiac bonneville

series 2 3800 i presume? you have to remove the alternator and the belt tensioner, use extreme caution with the tensioner, make sure engine is cool, look for a plastic elbow that is on the right side of the tensioner assembly, they break very easily and you have to get the whole tensioner assembly if you break that pipe. once you have the tensioner out there is only 2 bolts on the right side of the power steering pump holding it in. it will come out through the top.

Oct 14, 2012 | 1995 Pontiac Bonneville

1 Answer

How do i remove the oil pan from a 96 buick regal 3800 series?

I was told it's about a 3 hour job to change the oil pan gasket (on a '95 Regal w/3800 ). It says you must disconnect the power steering lines (because they run along the frame by the oil pan and get in the way), drop the subframe, and raise the engine to get the oil pan off. good-day ! thats GM for ya!! lol, The frame is in your way and the only way to get it out is to move the frame.

Jun 28, 2011 | 1996 Buick Regal Olympic Gold

1 Answer

I want buy motor overhall

There are two different engine sizes at Pontiac Transport. You can find it reading the 8th digit of the Vehicle Identification Number. This is the engine code.
6-231 (3.8L, VIN "L")
6-191 (3.1L, VIN "D")
To buy the motor go to the Internet @:
Select the Year, Make, and Model of your car.
1993, Pontiac, Transport.
Select Engine. Select the size of Engine.
I found some engines, Engine Size 3.8L, for $750.

Oct 23, 2010 | 1993 Pontiac Trans Sport

1 Answer

1993 3800 engine Pontiac Bonneville car has 88000 miles.Locked up and can not turn it with wrench.What would most likely be the problem? No antifreeze in the oil.

It could be a lot of things,but remove the drive belt to check all the pulleys to see if they turn freely.If so,then If then engine still will not turn,by hand ,then remove the timing cover and check the timing chain and gears,if it is not in there then the engine will have an enternal problem.

Sep 14, 2010 | 1993 Pontiac Bonneville

1 Answer

Need instructions for changing rack and pinion on 1990 pontiac transport

Break the lugnuts loose on both frt wheels. Jack up frt of vehicle. Remove wheels and remove the intermediate shaft attaching bolt. Support the subframe assembly. Remove the rear cradle bolts and lower the cradle slightly Remove the outer tierod attaching nuts and remove from spindles. Loosen and remove the power steering lines. Remove the steeing rack attaching bolts and rack.

Apr 08, 2010 | 1993 Pontiac Trans Sport

1 Answer

How to install transmission solenoid in a 2001 pontiac bonneville 2.8

The solenoids are under the side pan on the transmission on the drivers side. You will have to go through the drivers side fender well. Remove the wheel, brake caliper, spindle, take the rack and pinion loose, install engine support, place jack under left side (drivers side) of subframe, remove subframe mounting bolts, loosen (do not remove) right side subframe mounting bolts, lower left side of subframe 4 to 6 inchs, go to engine support and lower engine and transmission down just enough so that transmission side pan can be removed. Thanks and good luck with your repairs.

Nov 12, 2009 | 2001 Pontiac Bonneville

1 Answer

The car(pontiac firebird 3800 v6)overheats and

Check to make sure the radiator fan is coming on watch it for ten minute as it runs it should come on if it doesn't replace the fan relay or the fan coolant temp senson located on engine block upper area of engine.

Jul 14, 2009 | 1999 Pontiac Firebird

1 Answer

How do i drop the engine in the 1995 buick skylark

the easyest way is to remove the engine and transmission together. leave them bolted to the subframe and disconnect everything off the engine and lower the subframe.
Or you can seperate the trans away from the engine, hold the trans up (GM makes a support bar) and pull the engine up out of the compartment. Have fun!

Jul 08, 2009 | 1995 Buick Skylark

2 Answers

1993 pontiac transport van 3800

for the idle i would say idling sensor. for out of drive sounds like a trnsmission problem.

Aug 07, 2008 | 1993 Pontiac Trans Sport

Not finding what you are looking for?
1994 Pontiac Trans Sport Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides