Question about 1986 Nissan Pickup 4WD 1986

1 Answer

CHANGING THE FUEL PUMP ON A 1986.5 NISSAN HARDBODY EXT CAB 4X4

I HAVE BEEN LOOKING ON LINE FOR THE BEST DEAL ON A REPLACEMENT FUEL PUMP FOR MY 1986.5 NISSAN HARDBODY EXT CAB 4X4 TRUCK WITH A STD TRANS. MOST PLACES LIST THE SAME PART # FOR BOTH THE 2WD AND 4WD MODELS OF THIS TRUCK. SOME ALSO LIST DIFFERENT PUMPS FOR THE TWO VG30 MODELS. MY QUESTION IS IS THERE A DIFFERENCE OR IS IT SAFE TO USE A PART THAT WAS LISTED FOR BOTH THE 2WD & 4WD VG30 MODELS. ALSO WOULD IT BE EASIER TO REMOVE THE TANK OR THE TRUCK BED TO DO THIS JOB? THANK YOU FOR YOUR TIME...

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 122 Answers

Lol good ? look at your tank staps compared too the bed bolts might be cheaper getting new bolts rather then fuel straps, the pumps from a 2 or 4 wheel might not make a difference *** lond as same engine.

Posted on May 10, 2009

Testimonial: "Went with the bolts holding the bed (6)of them. It was actually pretty easy, sprayed the bolts with some WD40 the day before we did the job. Thanks!"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1986 nissan D21 ext cab 4x4 with a 30i is hard starting stumbles and surges


Bad timeing belt, or spark timing system. Last time serviced? Maybe time to take in. let them diagnose.

Mar 08, 2015 | 1986 Nissan Pickup 4WD 1986

1 Answer

Hey there! my name is ashley and i have 1986 nissan XE 720 z24. one day the tach, speedometer, and turning signals quit working. also something is draining the battery. the same day the electrical problems...


check fuses inside truck . If any dought change it cause sometimes they are hard to tell. I have a 1986 nissan hardbody 4x4 myself.Buy yourself a haines manuel cause the fuel system is pretty weird . good luck i stop by and check out the nissan questions everyday,almost.

Apr 14, 2011 | 1986 Nissan Pickup 4WD 1986

1 Answer

How do the accessory fuse look for the 1986 pickup


i dont understand your question but if its the ones in interior fuse panel they are flat and have a wire in shape of a z inside them .If wire is broken replace fuse. Best of luck i own 1986 nissan hardbody d21 4x4

Feb 21, 2011 | 1986 Nissan Pickup 4WD 1986

1 Answer

Where is the idle sensor in a 1988 nissan hardbody with a z24 and how can i find out if its bad


look up part on web sit like autozone so u know what u are looking for and should be on right side of intake

Jan 23, 2011 | 1986 Nissan King Cab

2 Answers

What are the signs and symptoms of a fuel pump needing replaced. Other than the obvious that the car will not start 2000 Nissan frontier V6, 3.3L 4x4 crew cab


You don't hear it running when your turn the key on just before the crank position.

You have replaced the fuel filter and it was pretty much stopped up. (destroyed pump trying to pump through stopped up filter.)

Because it was going bad you couldn't drive fast because it wasn't pumping enough fuel.

Disconnect fuel line and see if fuel comes out when you turn the key on.

Dec 23, 2010 | 2000 Nissan Frontier

1 Answer

Car radio displays "code error" when i switch t on. how do i reset it


error codes in 2004 4x4 nissan hardbody radio b/cab how do i reset it

Aug 06, 2010 | 1990 Nissan Hardbody King Cab

1 Answer

1994 Nissan hardbody v6-4x4 ext cab Questions


Sounds like pump drawing too much current , and by putting in a heavier fuse like that your just asking for a fire. Have a fuel pressure test done, that should confirm if pump shot. My guess is that it is. You have tried new fuel filter to see if that helps at all didn't you? When/if you pull the pump out, have a look for excessive dirt, which is always a consideration. Any blockage will make pump work harder, thus cause a higher amperage situation also.

Apr 04, 2009 | 1994 Nissan Pickup

Not finding what you are looking for?
Cars & Trucks Logo

689 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...