Question about 2007 Scion tC Coupe

1 Answer

The alarm does not beep when remote is pressed

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Scion Master
  • 827 Answers

Well if you have the one that came with the car, it does not beep, it just flashes, the lights will flash and the lights on the mirrors, now if you changed it to a add on not sure as to what your problem is

Posted on Nov 30, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get my alarm system to chirp instead of beep when it goes off or when I lock my doors with the remote entry key fob?


Check to see if your vehicle honks when you press the "lock" button on your key fob. Press the "lock" button multiple times in a row. Many devices won't beep unless you double-tap the button after locking. If the horn doesn't honk, but the lights flash, your chirp feature is probably disabled.

Use your keyless fob and ignition key to enable the audible chirp. The process varies considerably on different makes and models. You must usually consult your owner's manual, a dealership or the alarm manufacturer for the correct process.

Jan 29, 2015 | 2006 Hyundai Tiburon

1 Answer

Keyless remote


hi Alan

what procedure you are doing for remote matching?
try this one and let me know.

1 Unlock the car, get in and close the door

2 Switch ignition on

3 Press the door lock button on the dash to lock the car

4 Press and hold the door lock button on the dash, the alarm will beep

5 Keep holding the door lock button on the dash, press and hold the lock on the remote,

the alarm will beep

Repeat (5) for the other remotes,

6 leave the door lock button on the dash, the alarm will beep, switch ignition off

Feb 13, 2014 | Suzuki Cars & Trucks

1 Answer

How to start a proton savvy with no chip in key housing


If not the battery (replacement) then check to make sure the transponder is not missing from the remote. Should be a small plastic to slot in the key. If still not working then you may need to reprogram it. It can only work if you have 2 set of keys to put in the ignition:

[1] Take the key that needs programming put it in the ignition and turn to the on position and then press and hold in the alarm reset button..

[2] While still holding in the reset button turn the ignition off and remove the key..

[3] Re-insert the key and turn the Ignition to the ON position.

[4] Release the alarm reset button and then press it in once..

[5] Now with the ignition still switched on take hold of your SPARE key and press the lock button on your spare key..the alarm should "BEEP" once..

[6] Now press the Lock button on the key that has lost its programming..alarm should "BEEP" again..

[7] Switch ignition off.

Try that it should work

Feb 21, 2013 | Cars & Trucks

2 Answers

2010 mahindra scorpio: how do you program a 2nd alarm remote


You'll need to find the valet switch in your scorpio. It is in glove box, towards the top, near the metal clip in which the lid of Glove Box Locks. You have to turn "ON" the ignition. Press that button once.....Leave it Press that button again and hold it You'll hear a beep confirming remote programming mode Now press lock button of each remote to be programmed one by one for atleast 2 seconds You'll hear a small beep on each button press confirming successful remote registration Now leave that button and close all doors and check the remotes for programming

Mar 11, 2012 | 2011 Mahindra Scorpio

1 Answer

My 1999 Bonneville will be sitting in a parking lot at work or at home and the alarm will just start going off. No one is around or close by with the keyless remote.\r\nWhat is causing this and can i...


A lot depends on exactly what is happening here. Are we talking about an aftermarket alarm system? If so, I personally would recommend removing the entire system - they are usually more trouble than they are worth! (Just my personal opinion based on 36 years of auto repair experience)

NOTE: The information below applies ONLY to problems with the FACTORY security system.

There is a possibility that the horns going off are not being caused by the alarm system at all. Some GM airbag modules/steering wheel switches have been known to short out intermittently and cause the horns to sound for no apparent reason. If the horn is staying on solid (BEEEEEEEEEEEEEEEEEPPPPP) then it is most likely NOT the alarm system. If it is beeping on and off at regular intervals (BEEP.....BEEP......BEEP...) and the headlamps are flashing, then the security system is probably at fault.

Low battery voltage or a shorted cell in a battery can "trick" your alarm system into "thinking" that someone is trying to steal your car. A THOROUGH battery and charging system check should be performed to find out if this could be the cause.

Also, your factory alarm is a PassKeyII system. This means that if there is a malfunction in the system, there is most likely one or more fault codes stored in the Body Control Module (BCM) that can lead you to the cause of the problem so you can get it fixed.

Please note that MOST generic code readers CANNOT access these type of codes.

Another way to work around this is to "disarm" the system. To do this, unlock the door using the key. Press the "unlock" button on the door. Then press the "unlock" button on the key fob (keyless remote). The system will disarm. When you leave your car, use the KEY, not the remote to lock the car. (If you use the remote, the system will be armed again.)

Aug 13, 2011 | 1999 Pontiac Bonneville

1 Answer

Re; 1996 V/W Jetta Alarm system won't shut off . Happened to hit the door lock button when the car was running and it triggered the alarm. Tried everything with the key in the driver's door and it will...


Disconnecting the car battery will reset the alarm system. When you first connect the car battery, the alarm will sound briefly, then stop. You will have to retrain the alarm system to recognize your remotes. The procedure for that varies from one year model to the other. On my 1998 you do it by putting the key in the door lock and holding it full counterclockwise until you hear a brief beep from the alarm horn. Then press a button on your remote and the system will learn to recognize that remote.

Jan 22, 2011 | 1997 Volkswagen Jetta

2 Answers

Lock function works but lights do not come on and horn does not blow when lock or alarm buttons are pressed on the remote.


try this one. hold both lock and unlock buttons for about 10 seconds. the truck should beep and the light should flash twice. that switches alarm modes from quiet to loud/on and wiseversa.( hope i spelled that one right).

Dec 31, 2010 | 2008 Nissan Frontier

1 Answer

The alarm does not beep when remote is pressed scion tc 2006


Hold down the lock button for about 5-10 seconds

May 10, 2009 | 2007 Scion tC Coupe

1 Answer

1997 accord the door lock remote won't work and it only will beep a couple of times when you press the top button on the remote. checked the fuses and changed the batery.


The buttons on the remote do different things.Number I turns the beeping and alarm either on or off. (2 different settings). The number II button Arms and disarms the car. One beep is armed and two is disarmed. Try it out now, You'll understand.

Dec 03, 2008 | 1997 Honda Accord

1 Answer

I have a 57 honda civic, the remote central locking is not working, and the alarm is sounding! the key has battery but will not lock/open or turn off the alarm?


get in the vehicle press hold the red button of the transmitter then on and off the ignition,continue till the alarm beep then release the transmitter,your remote control is ready to use.

please rate me.

Nov 21, 2008 | 2003 Honda Civic

Not finding what you are looking for?
2007 Scion tC Coupe Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Scion Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Scion Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...