Question about Hyundai Elantra

2 Answers

I need the key to start engine or by-pass the immobilizer.

I have lost both keys and can not start the engine with copy key. The starter motor is working, but no ignition. The dealership does not know how to make the key with immobilizer for Hyundai Elantra 1997. I have original bag for keys with some code. I need the key or by-pass the immobilizer.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 1 Answer

I need a key to start my car

Posted on Jul 09, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 187 Answers

There is a chip in the key on the newer cars. The dealer should be able to send your information to Hyundai and order a new key. Pricey. Check with another dealer.

Posted on May 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Won't start, check engine light come on, will start


wont crank or wont start, no car starts (cept my M/t) unless cranked with the starter motor.
the starter motor starts the engine.
so which is it, not cranking?
also there is a Immobilizer (SKIM) lamp that must not be on , cranking or its will not start. by design.

this is correct. the CEL lamp glowing tells you 2 things
EFI is now active and the (ECU/PCM) just passed the basic test.

if its slow? to come on , the fuses for it are loose/bad or the battery is weak.
or discharged, or the key switch is failing.

find any ASE shop in town and get it checked out.
ASE are pro grade shops. that are honest and very skilled.

Oct 02, 2014 | 1995 Jeep Wrangler

1 Answer

Changed ignition and door locks and now my hyundai sonata wont start


Your original keys had a computer chip in them that is programed to your car's computer and you will have to have a dealership reprogram your new keys to match your car's computer. or if you still have the original ignition lock you can reinstall it and contact your local dealership and give them your car's Vin# which is located on title or vehicle registration. And most dealerships can make you a new ignition key. Then your car should sta

Apr 12, 2014 | Hyundai Motor 2002 Sonata

1 Answer

1986 dodge van


Yes, the solenoid is mounted on the starter.
One small jumper wire from the battery cable connection on the starter to the small wire solenoid connector should cause the starter motor to work and crank the engine. If key is on, engine should start. A small screwdriver works too, besides a jumper wire.
Check for voltage on the small wire to the solenoid with the key held in crank: if voltage there, the problem is the solenoid or starter motor. If no voltage to the solenoid, power has been lost between the ignition switch and the solenoid-possibly the neutral safety switch.

Sep 15, 2013 | Ford E-350 Cars & Trucks

1 Answer

Replace ignition lock cylinder


I lost my only key to my 2002 Chevy Venture Mini Van. I replaced the ignition switch. I followed the directions on how to program the new keys that came with the new switch and it didn't work. Does anyone have any suggestions on what to do. Cant afford to take it to a dealership.

Sep 02, 2013 | Chevrolet Venture Cars & Trucks

1 Answer

2004 PT Cruiser


Lets start at the beginning.
Do you have a check engine light when you turn the key switch on ?
Is the starter relay getting power from the key switch ?
Are all of the fuses in the box near the battery hot with the key on ?

Jul 23, 2013 | Cars & Trucks

2 Answers

2000 saturn LS1...ignition seems to be locked up. Battery functions, as well as the fuel pump, ignition coil, replaced the starter and crank sensor, and timing gears chain and water pump were all replaced...


Check power to starter motor and solenoid. If no power present on engine crank, then check ignition barrel, key and main fuses.If power present on cranking, but starter motor does not energize, then check starter connections and replace starter motor and solenoid if necessary.
Double check starter motor operation with starter removed from the engine. If it works, then check engine condition as this may be seized.

Nov 03, 2012 | Cars & Trucks

1 Answer

Lost ignition key 2009 Dodge Ram 1500


I doubt it.
With the key in lock position the shifter should be locked and the steering wheel will lock as soon as you turn it.
You would need to power several of the circuits including the wire going to the starter.
Did the truck have an alarm / anti-theft system ?

Jul 01, 2012 | 2009 Dodge Ram Pickup 1500

1 Answer

Need to override factory keyless entry wont start


First of all you need to programm all ignition keys using suitable diagnostic equipment (VAS, VAG-Com) connected to the data link connector of the car.

You have an electronic immobilizer key recognition problem. Now your key chip is not recognized by the transponder antenna fitted on the ignition switch barrel.

  • Everytime when you had a new key you must programm all available ignition car keys before trying to start the engine with this new key !!!

    tdisline_775.jpg


    This warning lamp indicates that the engine is locked by the immobilizer system, and the engine start sequence must be repeat again.

    From year 1995 in Audi-VW (VAG) cars is used engine immobilizer. The VAG group immobilizer system consists of an immobilizer ECU which controls the recognition of keys and the Engine Management ECU system. Immobilizer is activated when the ignition key is removed and, together with the engine control unit, largely prevents unauthorized starting of the engine. The system uses a transmitter and receiver unit in the ignition key (transponder). Whenever an attempt is made to start the engine, it transmits a new code to the car's electronics. The immobilizing is only cancelled and car motor electronic receives permission to start engine if the key sends a right authorization code.

    tdisline_776.jpg
  • Oct 30, 2011 | 1999 Volkswagen Jetta

    1 Answer

    Vw beetle does not start. seems like its some kind of anti theft protection. the car/key icon lights up, it turns over for a second , then off. this is the first time this has happened, but we bought it...


    First of all you need to programm all ignition keys using suitable diagnostic equipment (VAS, VAG-Com) connected to the data link connector of the car.

    You have an electronic immobilizer key recognition problem. Now your key chip is not recognized by the transponder antenna fitted on the ignition switch barrel.

  • Everytime when you had a new key you must programm all available ignition car keys before trying to start the engine with this new key !!!
  • $(".author").find("img").brokenImage({ replacement: "http://c.fixya.net/fixya20/images/icons/expert-not-found.jpg" }); function ToggleComments(obj,id) { $("#solutionComments_" + id).find(".thComment").show(); $(obj).hide(); }

    tdisline_775.jpg

    This warning lamp indicates that the engine is locked by the immobilizer system, and the engine start sequence must be repeat again.

    From year 1995 in Audi-VW (VAG) cars is used engine immobilizer. The VAG group immobilizer system consists of an immobilizer ECU which controls the recognition of keys and the Engine Management ECU system. Immobilizer is activated when the ignition key is removed and, together with the engine control unit, largely prevents unauthorized starting of the engine. The system uses a transmitter and receiver unit in the ignition key (transponder). Whenever an attempt is made to start the engine, it transmits a new code to the car's electronics. The immobilizing is only cancelled and car motor electronic receives permission to start engine if the key sends a right authorization code.

    tdisline_776.jpg

    Oct 15, 2011 | 1999 Volkswagen Beetle

    1 Answer

    HAD A NEW KEY MADE AND NOW IT WON'T START


    Everytime when you had a new key you must programm all available ignition car keys before trying to start the engine with this new key !!!

    First of all you need to programm all ignition keys using suitable diagnostic equipment (VAS, VAG-Com) connected to the data link connector of the car.

    You have an electronic immobilizer key recognition problem. Now your key chip is not recognized by the transponder antenna fitted on the ignition switch barrel.

    tdisline_775.jpg


    This warning lamp indicates that the engine is locked by the immobilizer system, and the engine start sequence must be repeat again.

    From year 1995 in Audi-VW (VAG) cars is used engine immobilizer. The VAG group immobilizer system consists of an immobilizer ECU which controls the recognition of keys and the Engine Management ECU system. Immobilizer is activated when the ignition key is removed and, together with the engine control unit, largely prevents unauthorized starting of the engine. The system uses a transmitter and receiver unit in the ignition key (transponder). Whenever an attempt is made to start the engine, it transmits a new code to the car's electronics. The immobilizing is only cancelled and car motor electronic receives permission to start engine if the key sends a right authorization code.

    tdisline_776.jpg

    Oct 04, 2011 | Volkswagen Passat Cars & Trucks

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    1,243 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hyundai Experts

    yadayada
    yadayada

    Level 3 Expert

    75817 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8180 Answers

    Are you a Hyundai Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...