Question about 2004 Mercury Mountaineer

2 Answers

How to reset the air bag sign staying lit on the dashboard in Mercury Mountaineer, 2004 model.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 37 Answers

Usually disconnecting the battery for anywhere from 10 - 30 mins resets any codes stored in memory.

Sometimes however it is a specific amount of "key cycling" that is required. eg: Turn key on, then off, then on for X seconds, then off for X seconds, then start engine etc. etc. etc.

If you have disconnected the battery, and there are no codes present but the light still comes on, there could be an issue with your airbag system. Wiring, or something was not done right.

WARNING : If you intend to work on the airbag yourself remember to disconnect battery for at least 45 mins. The air bag requires approx. 20-60 mins (depending on the vehicle, make and model and year) to discharge. If you do not do this you risk deploying the air bag, and that could ****!

Posted on May 10, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 937 Answers

You can solve it with a tool and you can find some good ones in chinasinoy.com

Posted on Mar 16, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 mercury mountaineer air conditioner will not hold a charge


sadly freon leaks are hard to find and fixes are quite costly take it to a specialty garage that does air conditioning .

May 01, 2016 | 2004 Mercury Mountaineer

1 Answer

My airbag light on my 2002 mercury mountaineer continiously stays illuminated any reason why and how to fix it?


This is probably a seat sensor but it could be the pretensioners or the air bag. When the vehicle is started, there is a sensor test that is run on the SRS (air bag) and if it finds something wrong, the light comes on. Given that this is a life safety device and there are hazardous parts in it, you should take it to a dealer to have it worked on.

Mar 24, 2014 | 2002 Mercury Mountaineer

1 Answer

Seat heater control switch 2004 Mercuty Mountaineer


remove the bolts holding on your seat. if it has seat bags fitted do not do that as you have a procedure for doing that.

Dec 21, 2013 | 2004 Mercury Mountaineer

1 Answer

My 2004 mercury sable air bag light blinks on and off 3 times...tried the battery thing..the switch thing..cant get to reset


When the air bag system has a problem it uses the air bag light tell you what the codes are. Three flashes then 1 or 2 second pause then 2 flashes would be a code 32. Then Google it and find out what the code is for. Hope this helps

Sep 26, 2013 | 2004 Mercury Sable

1 Answer

What does the senors on the dashboard that looks like this ( i ) mean?


I belive that is the low tire pressure indicator. Check the air pressure in all your tires. It may also be a bad pressure sensor if the pressure is good.

Sep 02, 2011 | 2004 Mercury Mountaineer

1 Answer

Where is the Idle Air Control Valve Located on a 2004 Mercury Mountaineer?


The IAC (Idle Air Control) valve is located inline in the air intake assembly.

Feb 19, 2011 | 2004 Mercury Mountaineer

1 Answer

2004 mercury mountaineer.heat problem When turning ac knob to heat clicking sound like door opening and closing repeatedly sounds and air blows cold instead of hot.


2004 mercury mountaineer.heat problem
When turning ac knob to heat clicking sound like door opening and closing repeatedly sounds and air blows cold instead of hot.

Sep 13, 2010 | 2004 Mercury Mountaineer

1 Answer

Removed and reinstalled factory radio from a 1999 mercury mountaineer and then the airbag light came on when the vehicle was started, how do i reset the airbag light?


remove battery and wait 30 secs computer now clear

re install cable and start with no codes
if air bag light comes on then you have a loose wire

Jan 10, 2010 | 1999 Mercury Mountaineer

2 Answers

Brake lights stay lit


hey i have had this problem before it probably the brake light switch it bad replace that it located under brake pedal

Feb 10, 2009 | 2004 Mercury Mountaineer

Not finding what you are looking for?
2004 Mercury Mountaineer Logo

785 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

fordexpert

Level 3 Expert

5467 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...