Question about 2006 Chevrolet Tahoe

2 Answers

Door locks quit working

I have a 2001 Chevy Tahoe and all of a suddone the the automatic door locks quit working. They will not lock or unlock with the remote or even with pushing the door lock switches on the doors. They do not lock automaticaly when driving down the road either. I've checked the fuses and everything is good. They did this a few days back but then for some reason they started working again. Now they're not working at all. I don't know where to start looking for the problem.

Posted by on

  • cctjacobs May 10, 2009

    Thanks for your help ..but did you read the whole problem? You can't even actuate the locks with the switch on the door panels inside the truck. They also no longer actuate when you reach 15mph......what's this have to do with a battery in my keyless remote?

  • Anonymous Mar 31, 2014

    the fuse is still good

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 351 Answers

Check battery in the remote

Posted on May 10, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My Tahoe started the same thing Have you found a solution

Posted on Jun 06, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I open the cargo door if it wont open?


rear door hatch lock repair GMC Chevrolet - YouTube

? 4:26
https://www.youtube.com/watch?v=QS3PMhGgyAg
Apr 5, 2014 - Uploaded by auto resource
2002 Yukon, rear hatch lock not locking. ... rear door hatch lock repair GMC Chevrolet. auto resource ... chevy tahoe lift gate notopening - Duration: 2:12. ... A Method how to unlock your car in 10 seconds :) - Duration: 0:35.

chevy tahoe lift gate not opening - YouTube

? 2:12
https://www.youtube.com/watch?v=xU6ybiY3F4I
Sep 1, 2010 - Uploaded by 76bluemoon
Back lift gate/glass would not open or release. Even when unlocked with the key fob or the unlock switch on the drivers/passenger door. ... How To Install Replace Rear Lift Gate handle 2002-09 GMC Envoy Chevy Trailblazer ...

Jan 16, 2016 | 2002 Chevrolet Tahoe

1 Answer

How to reset the alarm on a 2003 tahoe?


first replace the batteries in the remote . Also try manually locking the doors and use the key to open it .Sometimes that works. good luck

Nov 06, 2012 | 2003 Chevrolet Chevrolet Tahoe

1 Answer

2008 Chevy Blazer automatic door lock problem


you have a short in the locking system.

Aug 12, 2009 | 1996 Chevrolet Blazer

1 Answer

Program a new key fob for a 2002 chevy tahoe


1. Close all vehicle doors.



2. Insert the key into the ignition.


3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold
down until instructed to release in step 9.



4. Perform steps 5 through 8 in fairly rapid succession.


5. Turn the ignition switch to the ON position (as far as you can go without starting the
engine).



6. Turn the ignition switch to the OFF position.


7. Turn the ignition switch to the ON position.


8. Turn the ignition switch to the OFF position.


9. Release the power unlock button on the door panel. The vehicle will lock and unlock
the doors automatically.



10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until
the door locks and unlocks.
This step may take up to 30 seconds.



11. Repeat step 10 NOW for each additional transmitter (including any existing
transmitters).



12. Turn the ignition switch to the ON position in order to exit the transmitter programming
mode.




Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

May 27, 2009 | 2001 Chevrolet Blazer

1 Answer

Automatic door locks / 2001 Chevy Suburban


Your book should give you program options for the door locks If your fob wont work either you got a relay for the door lock bad it is located in the fuse panel push the door lock button and find the one that is clicking

Apr 11, 2009 | 2001 Chevrolet Suburban

2 Answers

Alarm problem on 2004 chevy tahoe


you will have to write your vehicles vin number down wich is if you look throught the windshild on the drivers side you will see it its a little plate with numbers but right down the vin number and take you drivers license and Registration with you to the chevy dealer ship and request the remote for that vehicle. and they should be able to get you one. as far as i know the remote is the only way to get the alarm off. I hope this helps you

Mar 21, 2009 | 2004 Chevrolet Tahoe

1 Answer

PROGRAMING ALARM REMOTE ON 95 TAHOE


Here it is straight from Alldata:
  1. Ground pin G of the Data Link Connector (DLC).**Bottom left pin**
    • Receiver will respond by locking, and unlocking doors within 2 seconds.
  1. Press any button of the first transmitter to be programmed.
  2. The control module will respond by locking/unlocking doors and activating rear window release.
  3. Press any button of the second transmitter to be programmed (if used).
  4. The control module will respond by locking/unlocking doors and activating the rear window release.
    1. Remove the ground applied to the reprogrammed connector.
      1. Transmitter operation is verified locking and unlocking the doors and activating the rear window release

Dec 23, 2008 | 2007 Chevrolet Malibu SS Sedan New Cars

1 Answer

Drivers door controls quit working


wires or plug where they pass from body to door in a big rubber sheaf

Oct 02, 2008 | 2001 Volvo S80

Not finding what you are looking for?
2006 Chevrolet Tahoe Logo

861 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...