Question about 1992 Ford Ranger

1 Answer

1992 ford ranger door chime wont stop

I can pull the fuse to make it stop but otherwise it will chime constantly. Ive tried larger fuse/no diff.

Posted by on

  • ddsmoose May 10, 2009

    tell me where to look and I will do it...

  • ddsmoose May 12, 2009

    Thank you for your help. I found it under the ash tray section of the dash...after I had tore up the dash. Silence is bliss.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

Find it & unplug it.

Posted on May 10, 2009

  • rage-n-ron May 10, 2009

    Follow your ear. Should be around the steering column area inside of dash. Probably a plastic rectangular shape with a rather large connector. You should be able to squeeze it and hear the pitch change. Annoying little sob isn't it!

  • rage-n-ron May 12, 2009

    Great! Hope your hands and arms don't look like you wrestled with a Tiger haha.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Door sensor alarm


Most door chimes can pull out It's right on the fuse panel on many cars

Nov 22, 2013 | 2003 Ford Windstar

1 Answer

92 ford ranger where is the fuse for the cig lighter


the fuse is under the dash on the drivers side below the park brake release, pop off access door to expose fuses. pull the labeled fuse, if no label consult owners manual for diagram. check all fuses while you are in there.

Apr 04, 2011 | 1992 Ford Ranger

1 Answer

What fuse do i pull to stop the warning dings for the headlights ,key in ignition, and seat belt sounds


there is what they call a chime module . located on the drives side in or near the fuse box by the lower kick pannel . this module could be about 2x2 color black/green/or tan . and look like it has a small speaker grill in it . remove this and it should stop the warning chimes

Mar 06, 2011 | 1996 Ford Ranger SuperCab

3 Answers

Looking for a fuse diagram for a 1992 ford ranger.


tail lights wont come on my 1992 ford ranger xlt but brake lights and back up lights work also instrument panel lights wont come on

Jan 15, 2010 | 1992 Ford Ranger

2 Answers

Seat belt chime always on belts operate correctly how do I stop the chime? 1992 honda civic


Find the wire under the seat and disconnect it, or pull the fuse (just make sure the fuse is not operating anything else).

Jul 04, 2009 | 1991 Honda Accord

1 Answer

1992 ford ranger wiper wont work wiper pump not working fuse ok?


check wire continuity with multimeter, have had switch go out on ranger as well.

Apr 05, 2009 | 1992 Ford Ranger

1 Answer

1992 Ford Ranger Healights


HAD THE SAME PROBLEM

REPLACED THE BLINKER/FLASHER/HIGH/LO/WHINDSHILD WHIPER UNIT $70 AT YOUR LOCAL AUTO ZOO EASY FIX THREE SCREWS FROM BOTTOM OF COLUM. REMOVE PLASTIC COVERS REMOVE 2 SCREWS FROM BLINKER UNIT REMOVE TWO CONECTORS AND INSTALL NEW

HOPE THIS HELPS

Nov 10, 2008 | 1992 Ford Ranger

1 Answer

1992 FORD RANGER


try replacing the fuel pump sensor and the ignition sensor. In my 94 ranger they in a fuse box right behind the battery. They are small black pull cubes. Ask a part store which one they are if you find them. I just had mine fixed at a ford dealer. Simple fix if it is the problem. John from Oregon

Oct 29, 2008 | 1992 Ford Ranger

1 Answer

Hi i have a question


you need to get a used one out of a junkyard and just reconnect the wires. alldata also has a great site for wiring

Sep 10, 2008 | 1992 Ford Ranger

Not finding what you are looking for?
1992 Ford Ranger Logo

Related Topics:

335 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...