Question about Buick LeSabre

2 Answers

Window crank broke on my 91 buick lasabre. How do I get door panel off to fix?

Posted by on

  • 1 more comment 
  • am13365 May 12, 2009

    manual window crank just spins. must be stripped. what is next step in fixing this problem?





    Thank you,

  • Christopher Keene May 11, 2010

    if this is a manuel window crank handle in your car then you can get a gm tool from auto parts store to remove locking clip from backside of handle to take broken one off and replace with new one.. let me know chris

  • Anonymous Mar 23, 2014

    where arre screws on 1987 buick lasabre door panel

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

You won't need to take the panel off to change the window crank handle. It is held on with a c-clip and a flat tool that can get between the panel and the base of the handle will be needed to get the clip off so the handle will come off.

Posted on May 10, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 201 Answers

Am13665,
sounds like meshing teeth on manuel handle are stripped down.
as stated earlier you can purchase a new handle and the gm door handle removing tool from your local parts store.autozone and advance auto parts as well as o"reillys carry these in stock and instructions are usually printed on the removal tool.hope this helps you solve your problem....lemmee know if you succeed... chris

Posted on May 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Buick 2002 LaSabre Custom all windows do not go up and down, door lock/unlock switch drivers side does not work(passenger & rear doors lock/unlock door switches work, trunk release button does n


coulb be the control switch on your panel you can take the door panel off and check for loose connections and try to test for continuity. if you dont know how take it to a shop and have them diagnose the electrical. im quite sure it the switch that burnt out

Oct 24, 2012 | 2002 Buick LeSabre

2 Answers

The passenger side window, something broke down in the door, the motor for the power windows still works, but there is nothing holding the window up? What broke? Is it a do it yourself job to fix it?


Its the window regulator thats broke. Most are made with plastic brackets and cable. The plastic breaks and the cable goes nuts then nothing is holding the window. You need to get a regulator, if you can take the door panel off you should be able to handle installing the window regulator.

Dec 08, 2010 | 2002 Buick Rendezvous

1 Answer

Driver side front door window will not move. Some sound, but no movement. How to Replace Window motor regulator on this 2000 Buick LaSabre Limited driver's door with multiple controls: Locks, speakers,...


First the door panel must be removed,then you can tell what part is broken.It will probably be the window trac assy.To replace that you must drill out the 3/16 rivets that hold it in and then replacethem with 1/4 -20 bolts on re-assembly.

Aug 05, 2010 | 2000 Buick LeSabre

1 Answer

1997 buick lasabre. How do you remove the front left door panal. The window does not work. When I press the switch I can here it click


Make sure the switch itself isn't bad. Pull the power window control assembly. I think there is a clip in one end that you push and the panel pops out. The switches are interchangeable so just swap one of the GOOD ones for the driver's switch and see what happens.
If you have to remove the panel, go to O'Reilly's or AutoZone and get a door panel removal tool. This will pop the plastic clips around the door panel. You may break a few but replacements are at the Auto store also. If I remember right, there are 2 large screws that secure the armrest to the door. Might be hidden under a plastic trim plate. BE CAREFUL plastic breaks. Good Luck

Feb 02, 2010 | 1997 Buick LeSabre

1 Answer

How do i remove the rear passanger 2000buick lasabre door panel.


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

May 08, 2009 | 2000 Buick LeSabre

2 Answers

03 buick rendezvou window problems window falls down in door


well i dont haVe that preoblem, you cant expect things to be free, the problem i had was the window will stay up or down sometimes but with a little force it works maybe someone spilled coffee or something on it, just dont slam your doors or pull them shut too hard

Apr 30, 2009 | 2002 Buick Century

1 Answer

Car won't start? 1992 Buick LaSabre


three core plug hahahah it has 3 coils crank sensor is located at the crank pulley it sits inside and creates a magnetic field and produces a low ac voltage 5 ac volts or less module then converts it to a squar wave to fire injectors and coils

Apr 24, 2009 | Buick LeSabre Cars & Trucks

1 Answer

Installing window motor, front passenger, 1991 Buick LaSabre


if you havent fixed it yet, see if you can slap a tiny bolt/nut in the hole to hold it down, if that doesnt work, you can always just leave it alone

Mar 18, 2009 | 1991 Buick LeSabre

1 Answer

Remove right rear door panel 2003 Buick LaSabre


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Nov 02, 2008 | 2003 Buick LeSabre

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

526 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...