Question about 1989 Isuzu Amigo

1 Answer

Need info on timing or belt on Isuzu Amigo 89'

Just replaced battery and starter
need info/help on timing and timing belt
thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Isuzu Master
  • 1,757 Answers

Sorry for the delay.
I am personally going back to answer your unanswered question. I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt/MARK(S) Diagrams that you will need, complete with Instructional and Directional Diagrams.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1989/make/isuzu/model/amigo/1989_isuzu_amigo_timing_belt_diagram_marks.htm

Posted on Mar 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 isuzu amigo will only start when pushed


check the starter relay and fuses

Feb 10, 2013 | 1992 Isuzu Amigo

1 Answer

99 amigo Timing???????


you should not change the belt maybe now its not in the same position and that's a big problem

Mar 13, 2012 | 1998 Isuzu Amigo

1 Answer

I need a diagram for a1999 isuzu amigo serpentine belt.


If the old belt is still on you dont need one. Draw your own before you take it off. Easy

Mar 07, 2011 | 1999 Isuzu Amigo

1 Answer

How do you remove and replace a starter for a 1992 2.6L Isuzu Amigo?


1.The battery negative and more importantly positive cable must be disconnected.
2. There are 2 14mm bolts holding the starter in place, the upper bolt can be removed by leaning over into the engine compartment from under the hood with a socket and extension on a ratchet or a ratcheting wrench.
3. crawl under the front passenger wheel and remove the positive cable nut, remove positive cable from starter.
4. unclip the small ground wire attached to starter.
5. remove the lower starter bolt.
6. There is room on the bottom of the vehicle to wiggle the starter down to the floor and out from under the vehicle. There isn't enough room to get the starter out from the engine compartment up and out from under the hood.
7. installation of new starter is reverse of installation.

This procedure should work on any Isuzu Rodeo, Trooper, Amigo, or Honda Passport with a 2.6L 4 cylinder 4ZE1 engine

Nov 12, 2010 | 1992 Isuzu Amigo

2 Answers

1990 Isuzu amigo starter good battery good engine will not crank just one click any help


check you connection on battery and the wire that runs from battery to starter wiggle it while some one is trying to start the car.any luck let us know

Oct 26, 2010 | 1992 Isuzu Amigo

1 Answer

2000 V-6 Isuzu Amigo recent new battery recent new alternator new fan belt new pulley great for 6mos, now doesn't start...no lights, nothing


have your battery tested and charged/replaced as neccessary. test your charging system for 13.5- 14.7 volts. i know they are fairly new but electrical componenets can fail in half a second. dont rely on them being new. check them anyways.

Dec 28, 2009 | 2000 Isuzu Amigo

1 Answer

Need belt routing diagram for 99 isuzu amigo v6


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1999/make/isuzu/model/amigo/1999_isuzu_amigo_drive_belt_routing_diagram.htm

Oct 15, 2009 | 1999 Isuzu Amigo

1 Answer

New starter


if it will not start after replaceing the starter you either need a starter relay or the ground to the block is bad.that is assuming you have a good battery and have checked for power to the starter and to the starter trigger wire.

Sep 24, 2009 | 1992 Isuzu Amigo

2 Answers

How to replace starter on 1998 isuzu amigo 2wd 4cyl


Removal
1. Battery ground cable.
2. Remove harness connectors
3. Remove bolts from starter.
Installation
1. Install starter assembly.
2. Install mounting bolts and tighten bolts to specified
torque
Torque: 25 N·m (18 lb ft)
3. Connect harness.
4. Reconnect the battery ground cable

Jul 02, 2009 | 1998 Isuzu Amigo

Not finding what you are looking for?

Open Questions:

Cars & Trucks Logo

Related Topics:

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...