Question about 1995 Chevrolet Camaro

1 Answer

Brakes skip and doesnt come to a complete stop

My brakes dont stop completely. They skip and i just had my brakes changed. My rotors are good. When i push on the brake pedal it make a little scratching sound like and it will go all the way down and then push back out. Nobody knows what is going on.

Posted by on

  • Kevin Rahme May 11, 2010

    Hi dose this happen just before coming to a complete stop and the brakes buzz and the brake pedal pulses

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 98 Answers

You might have bleed the brakes or its you power booster. it happen to me. the brakes was hard and i could not stop i pushed hard and the dam brake shot back a me

Posted on May 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

While trying to change my pads i noticed my rotors seem loose, also i cant get the brakes to stop grinding, squealing after reassembly.


Shane, rotors may seem loose until wheel is on car and torqued to specification, I recommend you take car in for your brakes to be inspected, estimate and repaired at a good shop. Arrange your appointment time so you can be there and watch how it is done and learn from it. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How to Replace the Brakes on 1997 Toyota Camry
How to Replace Front Brakes Toyota Camry
How to Install Replace Front Disc Brake Pads Rotors Toyota Camry 92 96...
Replace Camry Rear Brake Shoes



Jun 12, 2016 | 1997 Toyota Camry

1 Answer

How do i change pads


Jack, If you are talking about brake pads, check the links below for good info, or Re POST year, make, model, and complete question so we can here at fixya can answer your question effectively.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How to Replace Your Car Brake Pads
How to Change Front and rear Brake Pads and Rotors Complete Guide
Replacing Brakes How to Remove Brake Pads Rotors


May 12, 2016 | Cars & Trucks

4 Answers

Why is my 2003 Chevy Trailblazer brake pedal not releasing?


See if the return spring on the brake pedal is connected or may be stretched. This is a pretty good sized spring that is attached to the pedal arm and connects to the body up under the dash.

Jan 12, 2015 | 2003 Chevrolet Chevrolet TrailBlazer

1 Answer

Rubbing noise from front


have the cv joints checked out and check that the rubber boots are not loose and rubbing on the metal surrounds.

Mar 25, 2014 | 2010 Ford Focus 1.6

2 Answers

Brake pedal drops very low on first press only


It is most likely you have air in the brake fluid. The first press of the pedal compresses the air and the effect lasts for a little while.
Another cause may be warped (bent) rotors, the pads can be pushed back into the calipers by the off center area of the rotor. This means that the pads have to travel further in order to contact the rotors when you press the pedal.

Dec 06, 2013 | BMW Z4 Cars & Trucks

1 Answer

My 1994 Cadillac deville. Has been sitting for 5 years. I have got it running properly as far as the motor is concerned. But my brakes go all the way to the floor. The car stops, but not good. Sometime...


The first thing I would try is changing brake fluid, as brake fluid is hydroscopic (absorbs water) even with system sealed moisture in the air is getting into the reservoir. Some vehicles have a specific bleed procedure and as I am not familiar with this car, it will be a good idea to find this out. If that doesn't fix it then start looking at the booster system, this can be done by pushing the brake pedal down, start the car, once it is running the pedal should go down a little bit farther without any extra effort. If those 2 are ok then it is time to start looking at the calipers and/or wheel cylinders. Hope this helps

Feb 28, 2013 | Cars & Trucks

1 Answer

1993 buick lesabre changed the front rotars and pads and now the cars brake pedal is so hard to push down to get car to stop. Mechanic has checked both the front and back brakes and they are fine. T


I would jack up a front wheel and see if pushing on the pedal with the engine running will stop the wheel from turning.
You need to know if the pressure is reaching the wheels, or if the pads and rotors are too slick to stop the car.
Usually if the pedal is hard, the booster is not working or the brakes are glazed.
Can you stop the car with the parking brake ? That only uses the rear brakes.
You may need a second opinion from a different shop.

Jul 19, 2012 | Buick LeSabre Cars & Trucks

1 Answer

Vibration in brakes when stoping,had rotor turned and then replace problem comes back in just a few miles less than 100 .If you brake hard it seems to help for a stop or two.


One of the calipers may need to be changed. t may not be releasing completely and causing the brakes to ride on the rotors continent which would eventually rub grooves in the rotors. Also the tire may need to be speed balanced. When the fixed the brakes it may have taken care of some type of vibration but the tire could be the real culprit.

Apr 19, 2011 | 2006 GMC Sierra 1500 2WD

2 Answers

My hondaaccord shake when brakes .i just bought it. the guy told me he change brakepads


He changed the brakepads with worn rotors. You need to get your rotors turned. The old brakepads had worn down in a specific shape with how the rotors have worn down. If the rotors were worn down enough because of failure to change the pads in time, then new pads will skip along the surface of the rotor from which they clamp down on, causing the shaking you feel when braking. Go get it done at a shop, it shouldn't be much...somewhere in the range of $20 per rotor depending on the shop you go to.

Mar 14, 2011 | Honda Accord Cars & Trucks

1 Answer

I recently changed the brake pads and rotors. in the process of changing them i bleed the brake fluid to push in the caliper. Soon after when everything back into place, we tested the brakes. the brake...


bleed your brakes. new pads always take time to break in. Everytime I change a set they are never as good as the ones I replaced until after a little break in period. Do you have a high pedal or low pedal?

Nov 18, 2010 | 1996 Ford Taurus

Not finding what you are looking for?
1995 Chevrolet Camaro Logo

Related Topics:

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...