Question about 1993 Ford Ranger SuperCab

1 Answer

I just bought a new starter for my 1993 Ford Ranger 4.0 V6-5speed, being i was not the one to take it off, i am not sure about the 2 wires on the top. There are 2 bolts not sure what wire goes where. Thanks for your help

Posted by on

  • akacrazy4 May 10, 2009

    well yes and no, there are 3 wire for the starter, one of the wire goes to the bottom, the other 2 wires go at the top, but there are 2 post, the same size, this is the problem im having which post to which wire? or do both wire go to the same post, and if so, which post?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,369 Answers

Here's 95 Ranger 4.0L. Sorry, I don't have 93 but should be similar.

The heavy red wire should go on the large post.

I just bought a new - f637f9d.gif

Posted on May 09, 2009

  • gerry bissi May 10, 2009

    It's a strange circuit. Both are battery circuits. Here is one more illustration for you. I would touch the wires one at a time to each post and see if the starter licks in. If not I would experiment by connecting them both ways and see what happens. Just leave a battery post connection loose in case you have to pop it off quick.



×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Both coils do not fire on 1 and 4. Will start but only running on 2 cylinders. Could both coils be bad or should I look elsewhere?


Part 3 -How to Test the Ignition Module and Crank Sensor ...

easyautodiagnostics.com > Ford > 2.3L
Mar 1, 2012 - Spark plugs for cylinders #2 and #3 get spark at the exact same time. ...voltage -12 Volts) to both individual ignition coils within the coil pack. ... Ford Mustang or Ranger (or 2.3L Mazda B2300), this is what you'll need ... for this 'Switching Signal' at the coil pack... but you can also test this ... 1991, 1992, 1993.

How to Diagnose a Misfiring Cylinder (2.3L Ford Ranger ...

troubleshootmyvehicle.com > Ford > 2.3L
Apr 3, 2012 - Bad Fuel Injectors can cause a Misfire Condition. ... the ignition system on the 2.3L Ford Mustang or Ranger consists of 2 ignition coil packs, ...

2002 ranger misfire rough idle - Discussion on Topix

www.topix.com > Ford Ranger
Jul 27, 2007 - My truck is giving the code misfire in number 4 cyl. I replaced my spark plugs, Wires, Coil packs (both of them) and all my fuil ... three (3.0L v6) go bad, the fuel/air mixture gets messed up. Judged: 2. 2 ... My truck runs rough only at idle. ...code for ford ranger 2002, 2.3 5speed. truck runs like a champ but that ...

Extremely stumped! I need the best and brightest 1994 Ford ...

answers.edmunds.com > Edmunds Answers

Jan 31, 2016 | Cars & Trucks

1 Answer

How do i install a starter on a 2001 ford ranger ?


It is a simple task. First make sure to disconnect the battery's negative cable from the battery. Unbolt the starter wiring. Hold the replacement starter in position and make tighten the bolts. Bolt the starter wiring to the new starter. You can get starter for 2001 ford ranger at http://www.buyautoparts.com/autoparts/2001/Ford/Ranger/Starter.html

Jul 04, 2011 | 2001 Ford Ranger Regular Cab

2 Answers

How to remove a stsrter on a 1993 ford ranger


Hi. here's the procdeure on how to remove and replace new starte for your truck.

  1. Step 1 Disconnect the battery's negative cable from the battery using the battery wrench.
  2. Step 2 Lift the right front end of the Ranger with the floor jack and then lower it onto the jack stand. Make sure the jack stand is under the right front frame, but does not impede your access to the starter.
  3. Step 3 Climb under the Ranger with the socket set and unbolt the starter wiring using the socket set.
  4. Step 4 Support the body of the starter with one hand while you remove the two starter-mounting bolts with the socket set using your other hand. Do not let the starter rest on the loose bolts at any time during this process.
  5. Step 5 Set the old starter off to the side and hold the replacement starter in position. Thread the mounting bolts back in by hand and then tighten them down with the socket set. Once again, do not let the starter's weight rest on the bolts until you tighten them down fully.
  6. Step 6 Bolt the starter wiring to the new starter using the socket set.
  7. Step 7 Climb out and lower the Ranger off the jack stand using the floor jack. Reconnect the negative battery cable with the battery wrench.

Aug 12, 2010 | 1993 Ford Ranger SuperCab

2 Answers

Hello, i need instructions on how to wire a replacement solenoid in my 1995 ford ranger pickup, 4 cyl. The directions in the package only account for 3 wires and i have 4 wires going to my origional...


Starter solenoid???? 2 large posts and 2 small posts on old one or 2 large and 1 small? the one large wire goes to the starter(rear post), all the others goes on the front post. little wire goes on the little post, if the old one has 4 posts, then you have the wrong solenoid.

Oct 21, 2009 | 1995 Ford Ranger Supercab

2 Answers

Ford Ranger will not start


Does the car click when you turn the ignition? If it does, it is probably your starter. If the engine does not turn when you turn the ignition.

Sep 30, 2009 | 1993 Ford Ranger SuperCab

1 Answer

1993 ford ranger starter turns won't crank


Youll have to take it out and check the condition of the ring gear through the starter hole use mirror and torch if you have to.Before taking the starter out turn engine over by hand to a different position then try to start with key.Try this several times if it doesnt work first time Why was the original starter replaced.Im assuming the starter you brought was reconditioned or new Did you check that the battery is still ok?

Jul 20, 2008 | 1993 Ford Escort 4 Door

1 Answer

1993 Ford Ranger charging system problems


in order to answer your question i need to know if you have internal or external regulator for alternator

Jun 02, 2008 | 1993 Ford Ranger SuperCab

Not finding what you are looking for?
1993 Ford Ranger SuperCab Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...