Cannotfind timemarks on camsaft

SOHC or DOHC? - Ford Focus Forum, Ford Focus ST Forum, Ford Focus ...

www.focusfanatics.com/forum/spi...2000.../249258-sohc-dohc.html

Jan 26, 2011 - The eigth letter in the VIN is a P. If you could stop. ... SPI Performance (2000-2004) The place to chat about any 2.0L Split Port Injection engine ... What kind of engine in my 03 svt???
Mar 11, 2015
Non-interference engine or not on Ford Focus 2001 SE?
Mar 2, 2014
Do I have an interference engine?
Jul 19, 2011
2001 Focus Timing belt broke
Feb 3, 2011
More results from www.focusfanatics.com
SPI VIN 'P' Timing Belt Replacement - YouTube? 22:10www.youtube.com/watch?v=oWFVDjqPzykDec 9, 2011 - Uploaded by ZX2Fast... you how to replace/service the timing belt on a Ford SPI (CVH) engine ... how to do a water pump and timing ...ZETEC Engine Swap For SPI Ford Focus 00 01 02 0

What engine does yours have ? 2.0l Zetec ? You need special tools !

If you Blew off the timing belt then need Head work also since it is an interference Motor
meaning that the Valve train and Pistons Have no Clearance so U are going to need a lot more work than just a timing belt to run

Click on the following: direct, FREE Link. It has the diagrams for the Timing Marks you need.
http://www.2carpros.com/car_repair_information/year/2000/make/hyundai/model/accent/2000_hyundai_accent_timing_belt_diagram_marks.htm

Let me know if this helped.

http://search.aol.com/aol/search?query=2000+ford+focus+does+not+want+to+idle+for+a+long+time.&invocationType=msie70a

Click on the following direct Link.
With the DOHC you will need the Camshaft Sprocket Holding Tool and Camshaft Alignment Tool.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2000/make/ford/model/focus/2000_ford_focus_timing_belt_diagram_marks.htm

that is a common problem with the ford focus i have a 2001 and if your overflow bottle has the smallest of cracks in it then it will leak onto the mount and then to the tensioner. I would start with the overflow bottle e-mail me if you need more help

two options just pull them straight up or they make a special tool that you can buy to do this. if you are going to replace plugs you should go ahead and do the wires at the same time.

None really because of the engine harness. and also what the car is equipped with such as features.

please helpme i need timing marks for ford focus 2000 16 valvs