Question about 2003 Toyota Corolla
After reinstall the batery car in my Toyota Corolla 2002, the radio is not working. What can I do?
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
1. Jack up and support car on jack stand. Make sure to chock wheels and or lock the parking brake on.
2. Remove wheel
3. Remove cotter key, castle lock and nut at center of rotor that attaches the axle. - If you lack and impact gun to remove this - it is easier to loosen this nut with all of the wheels on the ground.
4. Remove outer tie rod from spindle, Tap out with hammer. Should not require much force.
5. Remove the single bolt from the lower ball joint and separate from spindle.
6. Pull axle out of spindle and remove from transmission. This may require you to drive this out with a hammer and punch ( I use a brass punch), make sure not to damage threads if you intend to reuse the axle.
To install reverse the procedure. Make sure to replace any cotter key removed with new ones during install.
Torque specs you need are
Ball Joint to Spindle = 91 ftlbs
Tie rod to spindle = 36 ftlbs
Drive axle hub nut = 166 ftlbs
Posted on Jun 07, 2009
SOURCE: 2005 Toyota Corolla Radio fuse
Pg. 250 of your 2005 Owner's Manual shows the location of the Fuse Boxes. There is one under your hood on the driver's side and the other is under the dash just to the left of steering wheel. Pg 272, will show you how to replace the fuses. Pg. 286-287 gives a diagram and description of each fuse and what part of the electrical system it enables.
This portion of the electrical system correspondeds to the fuse in position 32 on pg. 287 of the manual.
Your going to have to get on your back with a flashlight and open up the fuse box under the dash by the steering wheel. The lid of the fuse box shows the positions of the fuse and their amperage rating. Like I said, replace the fuse in postion 32 (15 Amp). There is a spare 15 Amp fuse in the fuse box under the hood (easy to get to, see the diagrams in the owner's manual). There is also a fuse puller tool next to the spare fuses.
Posted on Aug 11, 2009
Once you locate your fuse box (usually under the dash someplace), take the lid off & look at either the underside or the topside. Each fuse should be labeled.
Posted on Dec 20, 2009
Tips for a great answer:
Apr 02, 2013 | Toyota Corolla Cars & Trucks
Jul 13, 2011 | 2002 Toyota Corolla
Jul 24, 2010 | 2002 Toyota Corolla
May 05, 2010 | 2002 Toyota Corolla
Apr 05, 2010 | 1996 Toyota Corolla
Dec 20, 2009 | 2002 Toyota Corolla
Apr 26, 2009 | 1998 Toyota Corolla
Feb 22, 2009 | 2002 Toyota Corolla
Mar 18, 2015 | 2003 Toyota Corolla
279 people viewed this question
Usually answered in minutes!