Question about 2001 Chevrolet Blazer

1 Answer

Turning signals not working

Turn signals on 2001 chevy blazer not working. Tried to replace the 'flasher'. That was not the problem. What else could it be?

Posted by on

  • Dan C May 11, 2010

    Do the brake lights work?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 1,000 Answers

The way the system works is:
The fuse supplies 12 volts to the flasher unit then leaves the flasher and goes to the turn-signal switch in the steering column.
When you set the turn-signal switch to turn right or left, the switch sends that 12 volts to the front and rear bulbs. The voltage goes through the bulb, lighting the bulb and goes to ground.
If any of these components are not good than the lights will not work.
Check the fuse and make sure it is good, the fuse will be located under the hood at the fuse center.
Let me know if you have a test light and we can proceed from there.
Regards,

Posted on May 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 nissan sentra neither one of my turn signal bulb are working tried replacing the bulbs that didn't work.also tried switching the pigtail that didn't work either any idea what the problem


I had this problem with my car. Is ur hazzard flasher working? if they are working and the turn signals are not working. Try replacing the hazzard light switch. If the hazzard are not working then the combination flasher unit is bad. its what controls the signals and flasher.

Nov 10, 2012 | 2001 Nissan Sentra

1 Answer

T urn signal flasher does not flash on my 1996 chevy blazer


do u mean ur turn signals do not flash an does the green turn signal arrow on ur insterment panel light upwhen u go to turn them on...if they dont flash an the arrow lites replace the turn signal flasher ..it is a round sliver cylinder located in the fuse box or under the dash on the steering column

Jul 14, 2011 | 1996 Chevrolet Blazer

2 Answers

1997 Chevy Blazer four way flashers working but no left or right turn signals work, help!


find your owners manual, use it to find your fuse panel, read the legend and locate the turn signal flasher and the emergency flasher, exchange them as they are identical. make a mental note to drop by a car parts store and pick up a replacement some day. when you get the replacement, put it in the signal flasher socket and put the old one back into the emergency flasher socket.

Jun 21, 2011 | 1997 Chevrolet Blazer

2 Answers

My turn signals dont work on 95 chevy blazer....fuse fine


Usually it's the multifunction/combination switch (turn signal arm).

Feb 21, 2010 | 1995 Chevrolet Blazer

1 Answer

My turn signals on my 1995 chevy blazer don't work. Occasionally they come on, but don't work for more than a few seconds.


have you tried replacing the flasher it may have had a trailer wired up for it and didnt have a heavy duty flasher fuse installed and made the original lazy now or even ready to quit all together .

Feb 04, 2010 | 1995 Chevrolet Blazer

1 Answer

I have a 1997 chevy blazer the hazards work fine but the turn signal is not working I checked the fuse in the fuse panel. what else could it be


Replace the Turn Signal Flasher Relay. It has 2 relays. One for the Hazard lights and one for the Turn Signals. The Turn Signal Flasher Relay is located Front seating area, driver side, passenger side of steering column, under dash, mounted near cigarette lighter. Optional mounting location is under dash, on driver side of steering column. (Curtorsey Auto Zone)

Dec 15, 2009 | 1997 Chevrolet Blazer

1 Answer

Turn signal doesn't work on my 1995 chevy blazer, emergency flashers work


Sound like turn signal relay not working. On most Chevys it's in with the fuse box, but if not there. Look under the dash by fuse box or steering column.

Jun 04, 2009 | 1995 Chevrolet Blazer

1 Answer

1996 CHEVY BLAZER HAZZARD LIGHT WORK BUT TURN SIGNALS WONT.


Locate signal flasher & swap with hazard & see if the opposite occurs, if it does, replace flasher.

May 12, 2009 | 1996 Chevrolet Blazer

1 Answer

REplace the turn signal flasher


I believe it's on the passenger side, under or behind the glove box, w/ fuses. Let me know if u need more help.

Jan 05, 2009 | 2001 Chevrolet Blazer

1 Answer

I need to replace the flasher for the turn signals on a 2001 Chevy Blazer. Where is the old one located?


it may be part of the hazzard switch. many new modle vehicles have done away with a seperate flasher unit

Jan 05, 2009 | 2001 Chevrolet Blazer

Not finding what you are looking for?
2001 Chevrolet Blazer Logo

473 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...