Question about 2003 Chrysler Town & Country

1 Answer

WHERE IS THE FUELFILTER LOCATED AT ON THE 2003 TOWN&COUNTRY? THANKS

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chrysler Master
  • 76,691 Answers

The fuel filter on this vehicle is located on the top of the fuel tank. You will have to unbolt the tank retaining straps and lower the tank enough to work on the top. Of course the tank should be nearly empty and always supported from underneath. I suggest you have this done as it is not a fun job and has it's hazards. The fuel delivery system will be pressureized and must be pre-drained prior to opening the line or you may be doused with fuel. Drain the fuel delivery system by removing the fuel pump relay and running the engine until the fuel runs out. Disconnect the negative battery terminal before you start working on the filter. Be very careful

Posted on May 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I put a 2003 town & country transmission into a 2002 town & country


most likely it will fit unless the manufacturer changed the application that year but its not likely suoldnt be a problem

Mar 03, 2013 | 2002 Chrysler Town & Country

1 Answer

2003 Chrysler Town & Country DVD Player doesn't output picture to screen, audio on right side only.


The cost to repair it will cost you more then to just buy a used one from a auto wrecker.

Oct 19, 2012 | 2003 Chrysler Town & Country

1 Answer

Can u tell me where the fuse location for the center consolt lights on a chrysler voyager


In the U.S. the Chrysler Voyager was discontinued in 2003, but in Mexico and other parts of the world continues to market in 2004, the Chrysler Voyager was integrated to the line Town and Country, so the manuals are only available in the Town and Country.

The Heated Mirrors, Lower Instrument Panel Power Outlet and Removable Floor Console, when in the front position are fused with self resetting fuses that are only serviceable by an authorized dealer. The power seats are fused by a 30 Amp circuit breaker located under the driver's seat. The PowerWindows are fused by a 25 Amp circuit breaker located under the instrument panel near the steering column. Check there and look the label in the inside cover,
just remove the black filler panel.

Additional details cpuld find in the Owners Manual. Hope this helps.

Jan 27, 2011 | 2005 Chrysler Town & Country

1 Answer

Where is located the crankshaft position sensor in a chrysler town country 2003 3.8 engine.


I have same issue on my 2003 TC - 3.8L Van. Do you have a picture of the CPS location?

Sep 10, 2010 | 2003 Chrysler Town & Country

2 Answers

2003 Dodge Town and Country Van, 3.8 V6. Where is the engine cooling fan relay located? I replaced the blown 40 amp fuse, tested both fans, the are OK. Need to locate relay!


Down by the bottom of the radiator. pass side. on the frame/rad support. You probly have to remove front splash shield to get to it. I have never had to remove or change one.

Jan 23, 2010 | 2003 Chrysler Town & Country

1 Answer

How do you get the wiper blade from the arm to


Push the tab up & the blade slides inward. Most auto stores will change the blades for FREE if bought there.

Jan 08, 2010 | 2003 Chrysler Town & Country

1 Answer

Power locks do not work on 2003 chrysler town & country


try unhooking the battery for 3 minutes then reconnect, locks should start working, theres a problem with the computer programing with the locks, the dealers have to reprogram your computer so it doesnt happen again, thats a well kown problem,ive done many on caravans and town & countries, good luck.

Nov 13, 2009 | 2003 Chrysler Town & Country

1 Answer

Locassion of output speed sensor on 2003 Town and Country


The input and output speed sensors look identical on the connector side. The one over the solenoid pack is the input, the one closer to the left frame rail or left front wheel is the output sensor. I hope this helps.

Apr 26, 2009 | Chrysler Town and Country Cars & Trucks

Not finding what you are looking for?
2003 Chrysler Town & Country Logo

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...