Question about Chevrolet Blazer
Hi: Have someone push down on the hood while you pull the release cable, while cable pulled have them lift up on the hood and it should release. Hood is probably released but stuck, latch out of adjustment or hood support rubbers ( located on rad support) are set to high causing latch to be to tight.
Posted on May 21, 2009
Can you reach the cable itself?,or is it broke at the hood latch?IF its not broken at the outside latch, try to follow the cable,un-hook it from the handle and pull on the wire cable to open it.IF its broken at the latch itself,you are going to have to reach the latch through the grille and try to pull the lever the cable connects to.That part is no fun at all..!!
Posted on May 09, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
this is a hard one it depends on where it broke,can you cut the housing to get to cable core and pull with pleirs, if it snapped at latch then you will need to remove the grill or go from the bottom and try to hit the release the same wat the cable did,sometime if you grab the cable near the latch and pull hard it will open, good luck.
Posted on May 15, 2010
Tips for a great answer:
Feb 25, 2016 | 2005 Chevrolet Chevrolet Tahoe Z71
Oct 20, 2010 | 2001 Chevrolet Blazer
Apr 22, 2010 | 2000 Chevrolet Blazer
Jan 29, 2010 | 1992 Chevrolet S-10 Blazer
Dec 01, 2009 | 2000 Chevrolet Blazer
Jun 12, 2009 | 1996 Chevrolet Blazer
Mar 30, 2009 | 1999 Chevrolet Blazer
Mar 18, 2009 | 2001 Chevrolet Blazer
1,818 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: