Question about 1999 Hyundai Sonata

2 Answers

When i turn the ignition on the engine start o,k.,the rpm is o'k but when i drive the cars the rpm stick on 3000 rpm can evetone tell me whats can i do

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 14,036 Answers

Check accelerator or throttle sticking or idle speed control problems.

Posted on May 09, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 767 Answers

The rev counter could be faulty.
I hope the engine is responding ok on accelaration inspite of the rev counter being stuck on 3000rpm , if so thn its definately the rev counter being faulty.

Posted on May 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 jaguar xj8 when I drive it won't go over 3000rpm


Jaguar wont rev 3000 rpm Questions & Answers - Fixya

www.fixya.com > Forum > Tags > wont rev 3000 rpm
1998 Jaguar XJ8 won't rev over 3000 rpm ... Wont go beyong 3000 Revs s type 2001, wont go beyond 3000 Revs and it' in limp ... Question about 2002 X-Type ... My jaguar xjr8 year 2000 battery went dead started car went for short drive back ...

Jaguar engine cuts 3000 rpm Questions & Answers - Fixya

www.fixya.com > Forum > Tags > engine cuts 3000 rpm
1998 Jaguar XJ8 won't rev over 3000 rpm ... engine cuts out and shudders at 3000 rpm won't accelerateobd code p0332 2002 jaguar x type 3.0 l P0332 - Knock ... Car is boging out in park and will not go over ... driving, don't worry about it.

Rev Won't go up

www.jaguarforum.com/showthread.php?t=14662

Dec 15, 2015 | Jaguar Cars & Trucks

1 Answer

Starts but wont move whats wrong


Auto or stick transmission.
cars that dont move are
bad tranny/clutch or weak engine.
until you tell what trans in car, we can not help.
does the dash hve a Tachometer RPM gauge.
good, does it go real high with right foot, over 3000 RPM?
yes, bad transclutch
no, it says about 2000 max .
yes:>
then its ice frozen brakes. or a weak engine
only you know the ice question, i can see you. or car. or weather there..

Feb 13, 2014 | 1991 Honda Accord

1 Answer

Won't go into gear


is this an auto or stick shifted car, ??? we can not guess this, ever.
you said, Gear, that is stick shift and A/T has no gears.
it has, R, D, 1,2,.. selections... are all 4 dead.?
shudders?
starts,
is RPM 800 or more?
you then shift to say reverse...
and step on the throttle , RPM is 800 and it advances to 1500 or more
and car moves,
does RPM go above 3000 and not move
that means , the tranny (or TCM or sensors) are bad.
if your RPM goes to 2000 and is stuck there, and car will not
move in any shifted rage, 1,2,D,L, then the brakes are iced over.
the key to this mystery is RPM. the engine RPM will tell you
what is happening,
for sure.
post it. and we can tell you.

slipping is when the tranny allows RPM to be unlimited at right foot actions.
if the brakes are frozen the RPM will be at the TC clutch stall speed
that is , about 2000rpm max and will shake there. (5sec max doing that)
see the FSM on stall speed, of your A/T
if this is a clutch car, say so, M/T stick car, say so, that be DIFFERENT/

Feb 01, 2014 | 1999 Honda CR-V

1 Answer

Will not shift in my 2000 chevy lumina


a jeep lumina?
wrong forum but that is ok, seems to be common here.
what wont shift.
A/T or M/T auto or stick? tranny????
what does will not , mean?
I cant move the shift lever
i cant shift, to 2nd
IT (autobox ) will not shift ever, or slips or flares. or?
if its and A/T autotranny, tell me what it does right and wrong
here is an example.
i start engine.
i shift to drive car dont move, in any gear
i see RPM race high with right foot over 3000 RPM.
tranny failure. (slips)
or RPM stays near 1500, and engine sounds loaded,
and i find the parking brake stuck on, or the brakes are full of ice
and stuck fast.

Jan 21, 2014 | 2003 Jeep Grand Cherokee

1 Answer

Engine revving high on start up


I would definitely have your Idle Air Control valve checked/replace....I've had them stick at around 3000 rpms, even while driving, and couldn't stop the car without turning off the ignition first....

Feb 20, 2013 | Cars & Trucks

2 Answers

High idle after having battery changed


This is characteristic of a reset to the EMC (Engine control module). If the power is removed from the car during battery replacement the engine/driving parameters are reset back to the original factory settings. Running the car for about 10 to 15 minutes about 8 miles will begin the relearning to the idle.

Hope this helps?

PCM Idle Learn Procedure Honda Accord CarTrek com

Mar 04, 2017 | 2001 Honda Odyssey

2 Answers

Stick shift # Automatic RPM


That is normal,If you do the same speed in 4th gear the rpm's will almost double.

The rpm's will repond faster in a manual than an automatic.

In a manual the engine supplies the power required directly to the gear that you have selected thus the engine rpm's will increase or decrease as needed.

Jan 07, 2009 | 2002 Nissan Altima

2 Answers

On a 1997 chevy lumina car how do you clear the check engine light


Turn key ignition forward but do not start engine. Pump gas pedal fully 3 times then engine light will start flashing. Do not pump gas pedal short quick pumps. After light is flashing turn ignition off then start engine. The check engine will reset it's self.

Dec 30, 2008 | 1997 Chevrolet Lumina

1 Answer

Engine Quits at 3000RPM


Sounds like the dealer is shooting in the dark at your expense. If it was the O2 sensor, it would throw a code. Ofcourse, Fords drivability diagnostics was bad back then. I don't remember exactly how the ignition is set up on them. I would be looking at the trigger sensor for your ignition and ignition module.

Aug 27, 2008 | 1992 Mercury Capri

Not finding what you are looking for?
1999 Hyundai Sonata Logo

Related Topics:

673 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8725 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...